Used Gehring Honing Machines in Germany

GEHRING S-NC 250-45 honing machine

• Manufacturer: Gehring

Manufacturer: Maschinenfabrik Gehring GmbH & Co, 73760 Ostfildern , Germany Model No.: S-NC 250-45 Serial number: 720/4731 Year of Make: 1999 Control voltage: 24V DC Operating voltage: 400V AC, 50Hz Nominal power...

GEHRING S-NC 250-45 honing machine

Manufacturer: Maschinenfabrik Gehring GmbH & Co, 73760 Ostfildern , Germany Model No.: S-NC 250-45 Serial number: 720/4731 Year of Make: 1999 Control voltage: 24V DC Operating voltage: 400V AC, 50Hz Nominal power...

GEHRING P350-31P 1113-22432

• Manufacturer: Gehring

Control type: conventional | Freight basis: FCA | Honing: 4-31 mm | Hub: 350 mm | Discharge: 250 mm

GEHRING GCU2

• Manufacturer: Gehring

Used without warranty Type of control: conventional | Honing diameter: 9999999 mm | Stroke: 9999999 mm | Throat: 9999999 mm

GEHRING Z 350-125

• Manufacturer: Gehring
• Model: Z350-125

Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block The machine tool does not currently meet the basic safety and protection requirements as specified in the Bet...

1979 GEHRING M40-10

• Manufacturer: Gehring
• Model: M40-10

2 station rotary table Type of control: conventional | Honing diameter: 5-10 mm | Stroke: 40 mm

1965 GEHRING 1 Z 250-131

• Manufacturer: Gehring
• Model: 1 Z

180 degree turntable, various accessories - Mounted 2-station swivel table for holding holding 2 workpieces with mechanical workpiece clamping via hand lever. - Hydraulic infeed of the tool - Switch-off via time ...

1984 GEHRING M 3-40-12

• Manufacturer: Gehring

3-spindle, With measuring device - Machine is equipped for precision honing of a car valve body approx. Æ12 x 40 mm high, with a blind hole of approx. Æ8 mm x 20 mm, consisting of: - BOSCH SPS-control for program...

2000 GEHRING ES4-1000-45 NC

• Manufacturer: Gehring
• Model: ES4-1000-45 NC

4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: -10mm -12.3mm -13.3mm -21.1mm

2010 GEHRING L2-630

• Manufacturer: Gehring

This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot...

2013 GEHRING L2-630

• Manufacturer: Gehring

This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing appl...

Spotting Plate FLP 1000

• Manufacturer: Gehring

This work wheel can be used, for example, on a disk sanding, fine sanding and/or lapping machine. Application: Material removal for “gentle” processing of the workpiece surface, as well as keeping the tools flat ...

Gehring 1Z600F

• Manufacturer: Gehring
• Model: 1 Z
• Power requirement: 4.1 kilowatt

Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200m...