Building Filters
- Trusted Seller
GEA Powerpak Plus Thermoformer Machine, 2016
- Manufacturer: GEA
Web width: 540mm, 10-12 cycles per minute, 100psi, Busch 1144 BV forming pump, packaging material: rigid PETG up to .040"/ Tyvek, water: 45L per hour, forming web width: 540mm, non-forming web width: 530mm, formi...
Los Angeles, CA - Trusted Seller
2023 GEA KYTERO 500 Single Use Cell Harvesting Separator #41783
- Manufacturer: GEA
Excellent condition, little used 2023 GEA KYTERO 500 Single Use Cell Harvesting Separator. Manufactured in 2022, first set up in a lab in January 2023. According to the system log, this system had been run on 3 d...
- Trusted Seller
2023 GEA KYTERO 500 Single Use Cell Harvesting Perfusion Separator
- Manufacturer: GEA
“Only a Few Hours of Previous Use” 2023 GEA KYTERO 500 Single Use Cell Harvesting Separator . This is a little used, clean and excellent condition: Manufactured in 2022, first set up in a lab in January 2023. Acc...
- Trusted Seller
GEA-Minoiki 22" diameter stainless steel hammermill
- Manufacturer: GEA
GEA-Minoiki 22" diameter stainless steel hammermill, 15" x 19" hinged hopper infeed, 9" diameter infeed throat, rotary hammer assemble with (9) fixed hammers with replaceable tips, 40hp 230/460/3/50/60 belt drive...
Lodi, CA - Trusted Seller
Valve, Shut-Off, 3", S/st, GEA, Type 761-30 #S744678
- Manufacturer: GEA
GEA Air-Actuated Shut-Off Valve, Type 761-30, with Think Top Control. Sanitary tri-clamp fittings include a 3" inlet and 2" outlet. Rated for 3A dairy-grade compliance.
San Dimas, CA - Trusted Seller
Valve, Shut-Off, 2", Stainless Steel, GEA, Type MEO-OD2" (2) #S744659
- Manufacturer: GEA
GEA Tuchenhagen double-seat valve, Type MEO-OD2"/OD2"SZ-BD/BLMN48-V1-15N/S52/3A/B/20+, with 2" inlet and outlet. Constructed of 316L stainless steel, 3A dairy grade. Serial number 1438024-0010. Previously used in...
San Dimas, CA - Trusted Seller
Flash Dryer, GEA, Minerals or Biomass Drying, 27,000 lbs/hr water evap rate - C745152
- Manufacturer: GEA
GEA Flash Dryer System rated for 26,996 pounds per hour water evaporation rate, Partial Gas Recycled system with Comenco Systems direct fired air heater, 42MM BTU/hr heat input. System takes wet material through ...
California, USA - Trusted Seller
Valve, Shut-Off, 3", 316L Stainless Steel, GEA, Model MBO-OD3, Double-Seat #S744920
- Manufacturer: GEA
GEA 9-Valve Air Valve Cluster, Type MBO-OD3"-SZ-TM1-L3BA1-BE5, includes (9) GEA double-seat valves, with associated Stainless-steel Manifold, and Think Tops. Constructed of 316L stainless steel contacts, 3" inlet...
San Dimas, CA - Trusted Seller
Heat Exchanger, Plate, 9,910 SF, S/st, GEA, (637) Plates #C744887
- Manufacturer: GEA
GEA plate-type heat exchanger with stainless steel plates, includes (637) 304 stainless steel plates, 9,910 square feet of surface area, 10" diameter inlets & outlets. Rated for up to 350 GPM, 52.7 cubic-feet vol...
Chowchilla, CA - Trusted Seller
Centrifuge, Disc, Auto, Westfalia, WSC20-01-506, 15 HP #A744722
- Manufacturer: GEA
GEA Westfalia Centrifuge, Model WSC20-01-506, rated for maximum bowl speed of 7500 RPM, bowl volume 8L, solids space 4L, with both liquid phases discharged under 1-2 bar pressure. Includes 15 HP XP motor, 460/3/6...
Southern California, CA, USA - Trusted Seller
Heat Exchanger, Plate, 16 Plates, 316 S/st, 34" X 18", 140 PSI #S743657
- Manufacturer: GEA
GEA plate-type heat exchanger, Model number NT100T BYF-150, includes approximately (16) 316 stainless steel, measuring 34" x 18" plates, frame has additional 24" to accommodate more plates. Set up as 4-eye closed...
Chowchilla, CA - Trusted Seller
Westfalia De-Sludger Clarifier, Model SAMR 15037
- Manufacturer: GEA
Westfalia De-Sludger Clarifier, Model SAMR 15037 (2) Used Model SAMR-15037 Westfalia De-Sludger Clarifier stainless steel contact surfaces, 4,650 RPM max. bowl speed, bowl has 4.25 gallon sludge capacity, rated t...
California, USA - Trusted Seller
250 h.p. Electric Motor & Gearbox Drive Package for Overland Conveyor
- Manufacturer: GEA
250 h.p. Electric Motor & Gearbox Drive Package for Overland Conveyor. (Motor and Gearbox only – No Conveyor) BALDOR-RELIANCE 250 h.p. Electric Motor – 1785 rpm, TEFC, Super-E Severe Duty Constant torque, (3)-pha...
Westfalia SA-40-06-177
- Manufacturer: GEA
- Model: SA
Desludge disc unit. Discharge by pump. All stainless contact parts. 40 HP motor. Tools and foundation mounting plate included. Bowl speed 4,000 RPM's.
Westfalia SA-14-06-076
- Manufacturer: GEA
- Model: SA
With new belts, starter. Stainless contact parts. Tools included. Self thinking option available. All units are 460 V 3 phase.Call for details
GEA CA Centrifugal Separator
- Manufacturer: GEA
- Model: CA
Good condition GEA CA Centrifugal Separators available between 1982 and 1999 years. Located in USA and other countries. Click request price for more information.
USA
