Used Processing in Wallonia, Belgium

Core sand batch mixer 50 l, COLLIN

Motor DORDRECHT, type: 281030/4, serial number: 732932, 2,2 kW, 220/380 V, 1480 rpm With hand clap Motor with attachement to gearbox

Sand silo ± 5,5 m³, on 3 feet

Useful height 2700mm With dust filter, standing on 3 feet Cone length 2.000mm, tank length 700mm Entry Ø 160mm, exit Ø 150mm, height under cone 2350mm Without ladders, protective grating and drop flap at the exit...

Discharging belts 3800 x 800mm

Deflection of the rolls 200mm, drum Ø 240mm Outside dimensions: 4200 x 1100mm | Useful dimensions: 3800mm x 800mm | Motor: 2,2 kw, 1430 rpm,  220/380 V

Profile- and formbandsandpapering machine HUGO SCHNEIDER

• Manufacturer: Schneider

Way between the columns 600mm, table pivoting With aspiration and accessories With one carton rechange grinding belts , width 30 mm.,lenght +- 1480 mm.

Vertical band sandpapering machine ZIMMERMANN

• Manufacturer: Zimmermann

Table 500 mm x 500mm, tiltable, graduated Outside dimensions: 500 x 1000, h. 1700 mm | Motor: 1,3 / 1,7 KW, 380 V, 1400/800 rpm

Ladle heater, gas propane, SARGI

2 kW, 3 x 380 V With ventilator ±400 m³/h, 1 kW, 2900 rpm, 220/380 V Hi is e side ladle heater /pannel 1000x1000 mm. with control board and timer

Dust conveyor 150 l, KLEIN, type A15O

Year of construction: 1968, serial number: 058 For 100°C - 8 atmospheres With 2 sondes - is complete except one sonde SP overtaken = with switch cabinet Dust feeder

Frequency converter LOHER, 10 KVA 200 V. 300 HZ.

• Manufacturer: Loher

Motor: type: SN60M-2G, 8,5 kW, 2915 rpm, exit 220/380 V, 31/18 A Converter type DCG1610, 10 KVA, 200 V, 300 Hz Exit 220/380 V, 24/14,without control box

Screw conveyor, useful length 3050 mm, Ø 180mm

In good condition Outside length 4450 mm Useful length 3050 mm, Ø 180 mm Gear motor line with coupler Motor without label

Transport screw 1800 x 150mm

• Manufacturer: Webac

Useful length 1800mm, Ø 150mm 11 kW, 220/380 V, 50 Hz, 1390 rpm, direct drive Transport screw Ø 150mm Flange between Ø 200mm

Screw for mixer alone (slow)

Motor ± 4 hp, 1500 rpm, 220/380 V, rotations of the screw 70 rpm

Extraction belt conveyor 3900 x 575mm

Weight 1500 kg Gearmotor MECABLOC BR60PO, Serial number 717791/1, 1435 rpm, 9,1/5,25 A, 3 hp, 2,2 Kw, gearbox rapport 60/1 = 25 rpm Rollings width 675mm, Ø 310mm, axdistance 3600mm, with protections

Rubberbeltconveyor EA 6700 x 500mm

Transmission by belts, in good condition Outside dimensions: 7000 x 800mm | Useful dimensions: EA 6700mm x 500mm

Rubberbeltconveyor 4850mm x 780mm

Drummotor DRUMO, type DB15/142, 3 Kw, 1500 rpm, 220/380 V Bandspeed 1 m/s, with Inox funnel

Wood table sawing machine, Ø 600mm, 1470 rpm

Bore 40 mm Outside dimensions: 1400 x 900 mm | Motor: 8,8 kW, 12 hp, 1450 rpm, 380/660 V