Used Processing in Wallonia, Belgium

500 mm x 460 mm x 110 mm, 38 kg

550 mm x 440 mm x 90/90mm (pairs), 28 kg

940 mm x 860 mm x 150 mm, good casting plates GS, 132 kg

With trunnions, sleeves Ø 25 mm, traverses, conish clamps

Mobile suction trunks for dust and fumes

• Manufacturer: Nedermann

Type: 535, serial number: 522335 With wall bracket/console (see freehand sketch)

Motorized casting ladle, 20 t, IBW

Year of construction: 2004 Weight: 12 000 kg with out the lining 6380 kg. With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the oversi...

2006 Motorized casting ladle, 14t, IBW

Vessel: depth: ø1750 mm, h. 1630 mm Height of the hook ±800 mm With motorized tilting and remote control With manual gearmotor, frequency controlled With counterweight on the overside With mechanical switch to "t...

2006 Motorized casting ladle, 14t, IBW

Door dimensions: depth: ø1750 mm, h. 1630 mm Motor: SEW, type: K47DT90L4BMG, 1,5 kW, 1410 rpm, 230/400 V Height of the hook ± 800 mm, with remote control With manual gear motor, frequency controlled With counterw...

Alu melting furnace, gas, tiltable, 315 kg, MORGAN

• Manufacturer: Morgan

With burner ELCO, type EK3.60 G-ZVA20 With hydraulic unit, gas pressure regulator for natural gas With podium and stair, temperature sensor With crucible type BU350

1998 Alu melting furnace tiltable, 315 kg, MORGAN, natural gas

• Manufacturer: Morgan

Motor ALMA, 2,2 kW, 220/380 V With hydraulic unit With gas pressure regulator and gas burner ELCO type EK3.60 G-ZVA 20 With podium and stair ,with temperature sensor Max. thermal output 500 kW With crucible type ...

Screw conveyor 1020 mm, Ø 150 mm

Useful length 1020 mm, Ø 150 mm Gear motor BAUER 0,5 hp, 1420/33, 5 rpm, 220/380 V Chaine drive Motor sidewards With filling hole 440 mm x 350 mm With flange for screwing on bunker

Bench polisher 1side on the right

Motor WEG, 5,5 kW; 955 rpm; 380/660 V With protection/ extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Conveyor screw, 9800mm, Ø200mm

Gearmotor MERGER, 2,2 kW, 1415/94,05 rpm, 220/380 V Screw in two parts, chain drive

Induction furnace JUNKER, 4 t

• Manufacturer: Junker

Installed on load cells Electric control SIEMENS S7 Complete system consisting of: - 1 furnace body 4 t, with ring aspiration - power desk - condensator rack - electric control desk - furnace loading conveyor - p...

Dust filter DONALDSON TORIT, type DFO-48, 30 000 - 35 000 m³/h

• Manufacturer: Donaldson / Torit / DCE

Filter box without cartridgesWithout ventilator and electric controlWith filter cleaning by air impulseWith pipe 10 m, Ø 750 mm, 2 x 90 ° bends, pipe pre-separatorWith 2 dust buckets

1100 mm x 700 mm x 200 mm, 116 kg, welded

With trunnions With oval and round rings, Ø 22 mm With 4 rod handles