Used Processing in Wallonia, Belgium

Trusted Seller
Magnetic manuel crack detector TIEDE
- used
- Manufacturer: Tiede
With cable and plug Weight: ± 5 kg | External dimensions: length 300mm, width 45mm, height 180mm | Useful dimensions: length 165mm, height 120mm | Motor: 220 V single-phased
Amel, Belgium
Trusted Seller
Permeability tester GF, type PDU
- used
Weight: ± 5 kg | Dimensions: length 410mm, width 235mm, height 480mm
Amel, Belgium
Trusted Seller
2008 Treatment ladle FOUNDRY SERVICE, 2 t
- used
External dimensions: length 2150mm, width 1550mm, height 2650mm Treatment ladle with planetary gearbox With heat protection With excellent lining With special spout
Amel, Belgium
Trusted Seller
2 complet turbines for shot blast with motor G+F, Ø 495mm
- used
- Manufacturer: GF WHEELABRATOR
With motor With 7 slots Weight: ± 400 kg/pc | Motor: 2x 15 kW, 400 V | Output: ± 230 kg shot per turbine and minute
Amel, Belgium
Trusted Seller
KUKA robot, CE
- used
- Manufacturer: Kuka
First arm length 1250mm Second arm length 1000mmm With control board With protective grids With roller conveyor With gripper
Amel, Belgium
Trusted Seller
1989 Automatic core sand mixing line STEFFENS
- used
core send mixing plant for cold box smal vibrating convoyor for additifs and intensity regulations Volume testing device Storrge hopper ±250l Pneumatic discharge flap with inspection window and filling level prob...
Amel, Belgium
Trusted Seller
2008 Treatment ladle FOUNDRY SERVICE, 1 t
- used
Dimensions: largeur 1583mm, upper Ø 850 mm, lower Ø 700mm, total height 2465mm Planetary gearbox RSD80V, n° 42791/0001 Dimensions: - Ø 850/700mm - height 1250mm - total height 2465mm Lining is as good as new (unu...
Amel, Belgium
Trusted Seller
2006 Green sand mixer WEBAC with accessory, 28 t/h
- used
- Manufacturer: Webac
The capacity depends on the quality of the bentonite and of the sand Three-phase-motor, type 280M4 2 mixing runners Accessories: -water control SENSOR CONTROL FRS-M -sand scale -elevator -injection system
Amel, Belgium
Trusted Seller
Overband magnet, width 800mm, 2,2 kW
- used
- Manufacturer: Wagner
220 V-DC 2200 W cold / 1600 W warm 10 A cold / 7,1 A warm Between axles 1700mm Drum Ø 310mm Drive over 3 V-belts With one new cleated belt
Amel, Belgium
Trusted Seller
Induction furnace INDUCTOTHERM VIP350, 500 kg
- used
- Manufacturer: Inductotherm
Internal dimensions (without refractory): Depth: 730mm; Ø620mm With hydraulic unit Without cooling tower With water pump With 2 crucibles for alternative working With copper rails One crucible without lining
Amel, Belgium
Trusted Seller
2010 FASTLOOP, plate dimensions 2500 mm x 2300 mm
- used
- Manufacturer: SOGEMI
Fastloop with 9 plates, 2500 mm x 2300 mm (wooden plates with holes) With 5 motorisated rolling conveyors, width 1000 mm; lenght ( 1×3970mm; 3×3480mm; 1×2980mm) With 2 motorisated support roller cconveyors, width...
Amel, Belgium
Trusted Seller
Moulding machine OSBORN 716 R4F, table 850mm x 530mm
- used
Ram-jolt machine Weight: 1900 kg | Dimensions: width 1000mm, depth 1300mm, height 1800mm | Pression stroke: 165mm | Pression capacity: 11 500 kg | Pattern draw: 254mm | Jolt capacity: 625kg | Maximum depth of mou...
Amel, Belgium
Trusted Seller
Adjustable feet
- used
2 pc. D70 Height 710mm to 1300mm 2 pc. D70 Height 435mm to 665mm 2 pc. D50 Height 320mm to 580mm 4 pc. D50 Height 200mm to 320mm 1 pc. D50 Height 140mm to 200mm Adjustments on request
Amel, Belgium
Trusted Seller
2004 Articulated arm screw mixer EUROTEK, 20 t/h
- used
- Manufacturer: Eurotek
External dimensions: length 6000 mm, width 1250 mm, height 3630 mm With turbo mixing screw 15 kW First arm transport belt with motorized rotation and pneumatic brake Regulated sand inflow by 4 pneumatic slides co...
Amel, Belgium
Trusted Seller
2008 Cartridge dust collector ESTA, 36 000 m³/h
- used
Engine: 55 kW, 400 V, 50 Hz, typ MDV-55, seriel number 08003130 With 27 cartridges made of polyester needle felt With compressed air cleaning With control board With silencer 1 recuperation cone and pneumatic dus...
Amel, Belgium