Used Processing in Ontario, Canada

Donaldson air Filter Unit DWS6

• Manufacturer: Donaldson / Torit / DCE

-Shipping: 54” length x 50” width x 102” height -Model: Dws6 -208-460/60/3 Volts -Filter part number: P191889

350 Litres open top fiberglass tank

-4 stationary legs -Dome bottom -Open top -Fiberglass -Steel frame -78 imperial gallons

12,274 Litres viatec resin-fab tank

-2798 IMP gallon -Design temp and press 160 F -Structural layer: 745-4615 Isophthalic

Lightnin Mixer

• Manufacturer: Lightnin

-Shipping dimensions: 74" L x 63" W x 36" H -HP: 50/22 -575 V -RPM: 1770/1170 -60 hz

Filter Regulator

• Manufacturer: Festo

-Shipping dimensions: 2 1/2" L x 3 1/2" W x 5 1/2" H -Input/output: 3/4" -p1 max: 16 bar, 230psi/1,6 MPa -p2 max: 12 bar, 175 psi/1,2 MPa

Cartridge Filter Cavity

-New cartridges available -2 available -Total dimensions: -Height: 24" -Diameter: 8"

VIBRA SCREW CONTINUOUS BLENDER

• Manufacturer: Vibra

-CAPACITY: UP TO 1200 LBS/HR -24'' W x 102' L x 24'' DEEP BLENDING THROUGH -126'' OVERALL LENGTH -20'' DIA. INFEED PORT -14'' DISCHARGE PORT -1 HP AUGER DRIVE -1.5 HP VIBRATORY DRIVE -REMOVABLE STAINLESS STEEL C...

DAF System

• Manufacturer: DAF

-Has Penta-Drive DC Motor Speed Control with 10 speeds. WEG Motor -5 HP -3 Phase -Frame: W184JM -RPM 3490 -Volts: 208-230/460 -12.9/6.47 amps -Class 1 division 2 -Cont duty Baldor Motor -1/3 Hp -1750 RPM -56C fra...

Side Mount Agitator with SS Shaft & 2 Props

• Manufacturer: Chemineer

-Chemineer Agitator -Model: VLA-5 -Serial: 73374 -Electric Motor for Hazardous Locations: Class 1 Group D, Class 2 Group F & G -Manufacturer: Underwriters Laboratories Inc -HP: 1/2 -Volts: 550 -RPM: 1725 -Phase 3...

Filter Regulator

• Manufacturer: SMC

-Shipping dimensions: 3" L x 3" W x 10" H -Set press 7~100psi -Max press 150 psi -Max temp 140 F

7,169 Litres steel tank

-Tank dimensions: 145" tall x 62" -Cone bottom with a 3" drain -Top with lid -On steel legs

68 Litres standing tank

-Stationary -Flat bottom -With half closing lid -Legs are 30" -51" tall -Stainless steel

Scott Equipment co. hammer mill SH18-12

• Manufacturer: Scott

-Model: SH18-12 -Baldor motor: 5HP, 1725 RPM, 208-230/460 Volts -Shipping dimensions: fits on a skid, sits 21" tall -Inlet is 27" x 20"

Lightnin Top Mount Mixer

• Manufacturer: Lightnin

-Agitator/ tank mixers -Volt: 575, Phase: 3, HP: 1/2, AMPS: .9, RPM: 1725, Frame: 56C, -Manu Lightnin -Base is 9.5" x 9.5"

Garland KT6-EA Electric Steam Kettle

• Manufacturer: Garland

-Kettle Serial number: WT0716-91J-03 -Model: KT6-EA -Cleveland Range LTD: Model: STD-28 -Serial number: WT1592-92G14 -Garland: Model: KT6-EA -Serial number: WT0716-91J03 -Has drawer