Used Processing in Indiana, USA

BECKART ENVIRONMENTAL BATCH FILTER PRESS WASTEWATER TREATMENT SYSTEM

• Manufacturer: Beckart

REMOVAL DISCLAIMER: PLEASE NOTE THAT LINE ITEMS 1.3 AND 1.8 ARE LOCATED AT ANOTHER FACILITY, ~20 MINUTES FROM THE MAIN WAREHOUSE. PLEASE SEE ATTACHED DOCUMENT FOR FULL INVENTORY LIST. PHOTOS AND INVENTORY LIST ...

Parshall Flume

3 inch Parshall Flume flow measurement device. Can handle flow rates from 12.5 gpm up to 835 gpm with an accuracy of +/- 2-5%. The Parshall Flume is an economical and accurate way of measuring water flow in open ...

2014 McLanahan .

• Manufacturer: McLanahan

Qty available: 4 | Capacity: 2,362 Sq Ft | Width/dia: 9 Feet | Length: 70.2 Feet | Height: 14 Feet | Weight: 140 Tons short | Pressure: 200 psig

2015 Siebtechnik SBD 400K

• Manufacturer: Siebtechnik

Siebtechnik short bowl decanter (SBD) model SBD 400K, serial 6790. Speed 2800 rpm. Drive motor approx 20 HP.The SHORTBOWL decanter with cantilever design is the optimal solution for hot applications and high clea...

Schutte Two (2) 13100 Hammermills

• Manufacturer: Schutte

The Schutte Two (2) 13100 Hammermills offer robust performance with their 200 HP capacity, making them suitable for processing materials such as wood, paper, cardboard, shingles, and insulation. Each unit feature...

1999 MILNOR CLASSIC

• Manufacturer: Milnor

8 module, 110lb capacity CBW was used for washing industrial gloves. Machine is in good condition for its age and has been well maintained. It was loaded by a Milnor Conwa and used a centrifugal extractor (both a...

2006 Atlas Copco BD-520

• Manufacturer: Atlas-Copco
• Model: BD

Atlas Copco heated regenerative desiccant compressed air dryer rated for 150 psig and a pressure dew point of -40C/-40F. Twin towers. Skid mounted. Air flow approx 1100 cfm. ASME Nat'l Bd # 13082 MAWP 159.5 psi ...

2013 ENERGENICS S20 STAINLESS STEEL LINT FILTER

• Manufacturer: ENERGENICS

Stainless steel lint filter. Ready to ship. Electrical requirements: 120 volt

Conair Wortex XL-15

• Manufacturer: Conair

The Conair Wortex XL-15 is a used granulator equipped with a robust 20 HP motor, designed for efficient and effective material size reduction. The machine features an opening size of 13" x 18.5", which enhances i...

Rapid Three (3) 10HP Granulators

• Manufacturer: Rapid

This listing features three used Rapid 10 HP Granulators designed for efficient material processing. Each unit has an opening size of 18 inches by 10.5 inches, making it suitable for handling various recycling an...

Unknown Manufacturer: Used 7' Width x 19' Length Infeed

• Manufacturer: Unknown Manufacturer: Used

This used infeed conveyor is designed for efficient material handling in recycling and trash processing applications, serving as a dependable baler feeder. It features a 7-foot width and a 19-foot length, providi...

Conair B1504VLF411D

• Manufacturer: Conair

The Conair B1504VLF411D is a robust used granulator equipped with a 150 HP motor, ideal for recycling and trash equipment operations. Its opening size of 28" x 22" allows efficient processing, paired with a 3/8" ...

In Green 25 HP Granulator

• Manufacturer: In Green

The In Green 25 HP Granulator is a used machine in working condition, designed to meet medium-scale industrial granulating needs. It features a 34-inch width opening, providing ample capacity for handling various...

Rapid 400-60 Granulator System

• Manufacturer: Rapid

The Rapid 400-60 Granulator System is a robust piece of equipment designed for efficient material processing. It comes equipped with a powerful 40 HP motor and features a 24" x 18" opening, making it suitable for...

(Reduced!) 5HP Fluid Chillers-Glycol Chiller – 208V 3-Phase

• Manufacturer: Fluid Chillers, Inc.
• Model: AIR5000-BP-LT-OUT

We have this Fluid Chillers glycol chiller with a 5HP compressor and 1.5HP pump. Uses R404A refrigerant with an 11 lb charge. Runs on 208V, 3-phase power at 30.4 amps. Perfect for breweries, wineries, or other pr...