Processing » Hiroshima

Building Filters

604

Used Processing in Hiroshima, Japan

1992 Takasago Chemical 10000L
- used
- Manufacturer: Takasago Chemical
Material: Wetted parts SUS304 Power: 7.5kw | Material: Wetted part SUS 304 | Quantity saved: One
Hiroshima, Japan
Suiko PP tank
- used
- Manufacturer: Suiko
Cylindrical vertical type Sealed type Material: PE | Quantity saved: One
Hiroshima, Japan
1992 YAKKO SANGYO Cylindrical Vertical
- used
- Manufacturer: Hakko Industry
Receiver material: SS + glass lining With upper and lower mirror manhole
Hiroshima, Japan
A spiral pump
- used
Confirmation required. Note: No inventory number. (1) Place to put.
Hiroshima, Japan
Nishikaki pump UFS
- used
- Manufacturer: Nishikaki pump
Discharge rate: 0.05 m3 / min Power: 2.2kw | Material: Wetted SUS 304 | Quantity saved: One
Hiroshima, Japan
1979 HISAKA Manufacturing BFL 7 - 2050
- used
- Manufacturer: Hisaka
Motor: 11 kw Material: SUS 316 Bore size: 65 × 50 Head: 20M Flow rate: 0.5 m3 / min
Hiroshima, Japan
1991 Sanwa MFD
- used
- Manufacturer: Sanwa
SUS 1.5 kw suction / discharge: caliber 25/20 mm Discharge amount: 1 m 3 / h, head height: 15 m
Hiroshima, Japan
[New Stock] Made in Korea 1200Ø IDTS1200-1 to 3
- used
Available in two-, three-, or four-section configurations. All options are possible. [In Stock] Cassette Type Material of Powder Contact Parts: SUS304, Frame Material: SS400 Frame Diameter: 1200, Motor: 1.5kW Tap...
Hiroshima, Japan
Asada Ironworks AF-70
- used
- Manufacturer: Asada Ironworks
Filter case: SUS 304 Filter blade: SUS 430 Remove iron powder and coproduct powder in the liquid with a magnetized filter
Hiroshima, Japan
2003 LX-025A-TNHJR-6, Hisaka Mfg.
- used
- Manufacturer: Hisaka
Heat transfer area: 0.5 m2. Maximum operating temperature: 144°C on A side and B side. Confidential test has been conducted. Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
1985 [Hisaka Manufacturing] Spiral condenser No model
- used
- Manufacturer: Hisaka
Vortex type, design temperature: 50°C Heat transfer area 8㎡ Plate material: SUS317L
Hiroshima, Japan
［Carbon multi-tube heat exchanger (vertical type)
- used
Heat transfer area: 4.9 m2 Tube: inner diameter 25 mm, length 2000 mm Number of tubes: 31 1-pass specification Heat transfer area: 4.9 m2
Hiroshima, Japan
Seiko Kakoki TB2-100-RR2
- used
- Manufacturer: Seiko Kakoko
Air volume: 5.5 m3/min. Static pressure: 1.96KPa. Power: 1.5Kw200V
Hiroshima, Japan
Eyakikai 5 PSF
- used
- Manufacturer: Aiyaki Kai
Air volume 80 m3 / min Static pressure 3.5 Kpa Rotation speed 1750rpm
Hiroshima, Japan
1990 NPK HITB - 13 E 190
- used
- Manufacturer: NPK
15kw, 13m3/min Airflow: 13m3/min Static pressure: -1900mmAq
Hiroshima, Japan

Show More Results