Used Machine Tools in Hesse, Germany

1989 PLANK SRB-18H 1113-24037

• Manufacturer: PLANK

Control type: NC | Control name: OMEGA Counter | Freight basis: FCA | Drilling capacity in steel (diameter): mm | Discharge: mm | Workpiece height - max.: mm | Total power requirement: kW | Machine weight approx...

2006 BAUBLYS IF20IP SOMA 1113-6577

• Manufacturer: Baublys

Control type: CNC | Freight basis: FCA | Table size: *** mm | Vertical travel: *** mm

RÖHM three-jaw chuck

• Manufacturer: Röhm

Add-on Used three-jaw chuck with spiral ring and centrically clamping and individually adjustable reversible jaws, cast iron body Further information

RÖHM three-jaw chuck

• Manufacturer: Röhm

Additional Used three-jaw chuck Chuck flange with Morse taper for mounting in the tailstock or hollow spindle

1998 OERLIKON T22 1113-235143

• Manufacturer: Oerlikon - Leybold

Control type: CNC | Control name: Fanuc Series 160-M | Freight basis: FCA | Wheel diameter - max.: mm | Wheel width: mm | Total power requirement: kW | Machine weight approx.: t | Space requirement approx.: m

RÖHM four-jaw chuck

• Manufacturer: Röhm

Additional information Used four-jaw chuck with bore recess Accessories Chuck flange, short taper size 6, 1 set of stepped jaws Further information

2014 DGS SBF 300/ 1890 1113-23018

• Manufacturer: DGS

Coolant/Filter/Cooling Systems Emulsion DGS type SBF 300-1890, no. 39742-10, year 2014, weight 1750 kg and Gamma cooler

HOMMELWERKE 1113-25084

• Manufacturer: Hommel

Surface profile testing device Control type: conventional | Freight basis: FCA | Nominal power: kN | Material-ø max: mm | Material-ø min: mm | Drive power: kW | Drive speed: U / min | Total connected load: kW | O...

FISCHER ASCHAFFENBURG 1113-6488

• Manufacturer: Fischer

Well preserved hard stone plate with height adjustable feet and T-slot with two sliding tailstocks and tip height 150 mm.

RÖHM three-jaw chuck

• Manufacturer: Röhm

Add-on Used three-jaw chuck with spiral ring and centrically clamping and individually adjustable reversible jaws, cast iron body Further information

Thread cutting head for internal threads

Additional information Well-maintained thread cutting head for internal threads, complete in a wooden case Accessories Existing multi-range collets: 2 x 1-2.5, 2.5-4.5, 2 x 4.5-6.5 mm Further information

2001 ENGEL ES 11050/900 Duo 1113-90028

• Manufacturer: Engel

In series production Machine and robot condition are regularly checked by the EngelCare program Linear robot on the machine was completely overhauled in 2021

1997 MAHR PST-MSE 1113-25083

• Manufacturer: Mahr

Roughness measuring device Mahr Perthometer Hard stone test plate, measuring column, type PST-MSE

2004 KRAUSS MAFFEI 2300/12000/MC 1113-90027

• Manufacturer: Krauss-Maffei

Robot System core pulls heating channel controller - The machine is in a very good condition - Additionally complete cutters available. - A conveyor belt and Robot Systems(Model 2012)

1997 DEMAG Ergotech 1250-610 1113-215119

• Manufacturer: Demag
• Model: Ergotech

9302423 SPRITZGIESSMASCHINE, DEMAG-FOERDERTECHNIK, year 1999 9307836 TEMPERATURE CONTROLLER, PIOVAN GMBH GARCHING, THW9 , year of construction 2011 784065 TEMPERATURE CONTROL DEVICE, PLASTIC SERVICE GMBH, HRS 24I...