Used Industrial Furnaces & Ovens in Opole, Poland

Furnace, sawdust boiler with a stoker

Furnace with heating power of 600 KW Low-temperature furnace, automatic system for burning biomass Type INNOVEX - BOREX - AT Date of production 2006 Technical and operation documentation Nolting scraper The whole...

Furnace, blowing and extraction fans

Fans of various parameters, in working order.

Furnace for drying sawdust and wood chips

Viessmann 720 KW oil furnace

Capacity 720 KW Year 1995

Expansion vessel for 3000 l furnace

Diameter 140 cm Total height 260 cm Capacity 3000 l Year 1994

WEN 108 air and smoke furnace fan

Inlet 70 x 100 cm Outlet 70 cm Motor 22 kW

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Gas furnace (natural gas) 4 MW

TYPE LLR 4000 4 MW furnace Year 1999 Maximum flow temperature 120°C, maximum pressure 6 bar Used very little, only for cleaning the two adjacent biomass furnaces The furnace is in very good condition, as shown in...

Ash conveyor, waste removal from the Ż 35 furnace

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Emergency cooler for 3.5 MW furnace

A total of 8 fans, with high-performance radiators underneath. Two segments, one segment will cool 1750 kW.

Ash conveyor, waste removal from the Ż 34 furnace

Length: 4.50 m Screw diameter: 180 mm Outer diameter: 210 mm Motor with geared motor: 1.1 kW

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Urbas biomass furnace, rated power 5 MW, typed at 3.5 MW

Year 2002 Water temperature: 110 degrees Celsius, pressure: 6 bar Power: 5.0 MW, rated at 3.5 MW due to regulations and the lack of an electrostatic precipitator Delivery: late April – May 2026

Froling 200 KW biomass stove – new lining

Furnace with a heating capacity of 200 kW TYPE Lambdamat FWT 200 Year 1996 Fueled by biomass, bark, wood chips, and sawdust. New lining!!!

Furnace accessories

pumps, valves, etc. new and used as in the pictures Prices to be agreed The whole to see and receive in our warehouse after setting the date, please