Processing » Industrial Furnaces & Ovens

Search By Manufacturer

Search By Country

Building Filters

5225

Used Industrial Furnaces & Ovens

  • NEW ENGLAND WALK-IN

    NEW ENGLAND WALK-IN

    • Manufacturer: NEW ENGLAND

    DOUBLE DOOR OPENING WITH PRESSURE LATCHES AND STEEL PLATE FLOOR WITH CART TRACKS. HEAT IS SUPPLIED BY A PACKAGE BURNER FIRING INTO A PROTECTED AREA ABOVE THE WORK AREA AND CIRCULATED BACK TO FRONT BY A ROOF MOUN...

    Chicopee, MA
  • STEELMAN 633BA-C

    STEELMAN 633BA-C

    • Manufacturer: Steelman

    DOUBLE DOOR OPENING WITH POSITIVE LATCHING. PRIMARY HEAT CHAMBER AND AFTER BURNER CHAMBER ARE MOUNTED ON REAR WALL WITH HEAT (351,000 BTU/HR MAX. TOTAL) SUPPLIED BY TWO PACKAGE BURNERS. HEAT FLOW IS "TOP DOWN" I...

    Tolland, CT
  • KISS EQUIPMENT CORP PC2EB

    KISS EQUIPMENT CORP PC2EB

    • Manufacturer: KISS EQUIPMENT CORP

    DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. TOP MOUNTED COMBUSTION CHAMBER WITH 1,000,000 BTU/HR MAX BURNER. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF CREATING ...

    Tolland, CT
  • GRIEVE

    GRIEVE

    • Manufacturer: Grieve

    DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEATED AIR ENTERS WORK CHAMBER VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF CREATING A COMBINATION OF HORIZONTAL AND VERTICAL AIR FLOW. INTERIOR HAS AN ...

    Tolland, CT
  • GRIEVE B1-450-E

    GRIEVE B1-450-E

    • Manufacturer: Grieve

    DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEATING ELEMENTS AND CIRCULATING FAN ARE IN A PROTECTED CHAMBER BEHIND WORK AREA. WAS IN OPERATION UNTIL NOVEMBER 2025

    Tolland, CT
  • GRIEVE B1-450-E

    GRIEVE B1-450-E

    • Manufacturer: Grieve

    DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEATING ELEMENTS AND CIRCULATING FAN ARE IN A PROTECTED CHAMBER BEHIND WORK AREA. HEATED AIR ENTERS WORK CHAMBER VI...

    Tolland, CT
  • GRIEVE B1H-650

    GRIEVE B1H-650

    • Manufacturer: Grieve
    • Model: B1H-650

    DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEATING ELEMENTS AND CIRCULATING FAN ARE IN A PROTECTED CHAMBER BEHIND WORK AREA. HEATED AIR IS CIRCULATED HORIZONT...

    Tolland, CT
  • YOUNG & BERTKE

    YOUNG & BERTKE

    • Manufacturer: YOUNG & BERTKE

    DOUBLE DOOR OPENING WITH SIDE MOUNTED CIRCULATING FAN.

    Tolland, CT
  • GEORGE KOCH

    GEORGE KOCH

    • Manufacturer: Koch

    DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEATING ELEMENT CHAMBER AND CIRCULATING FAN ARE MOUNTED ON THE ROOF. HETED AIR ENTERS WORK CHAMBER VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF CRE...

    Tolland, CT
  • DESPATCH

    DESPATCH

    • Manufacturer: Despatch

    DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. ROOF MOUNTED HEATING ELEMENT CHAMBER WITH CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF CREATING A COMB...

    Tolland, CT
  • DESPATCH

    DESPATCH

    • Manufacturer: Despatch

    DOUBLE DOOR OPENING WITH PRESSURE LATCHES AND ROOF MOUNTED REMOVABLE HEATING ELEMENT CHAMBER WITH CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF CREATIN...

    Tolland, CT
  • DESPATCH RS-3

    DESPATCH RS-3

    • Manufacturer: Despatch
    • Model: RS-3

    DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEATING ELEMENTS ARE MOUNTED IN A PROTECTED AREA BEHIND WORK CHAMBER. HEATED AIR IS CIRCULATED VERTICALLY.

    Tolland, CT
  • DESPATCH V35STD

    DESPATCH V35STD

    • Manufacturer: Despatch
    • Model: V35STD

    DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED BELOW THE WORK CHAMBER IN A PROTECTED AREA. HEATED AIR IS CIRCULATED HORIZONTALLY.

    Tolland, CT
  • GRIEVE AB-650

    GRIEVE AB-650

    • Manufacturer: Grieve
    • Model: AB-650

    SINGLE SIDE SWING DOOR WITH PRESSURE TYPE LATCHES. HEATING ELEMENTS ARE MOUNTED IN BOTH SIDE WALLS AND ARE PROTECTED BY AN INTERIOR SHROUD. A DIRECT DRIVE CIRCULATING FAN MOUNTED IN THE REAR WALL CIRCULATES THE H...

    Tolland, CT
  • Trusted Seller
    MRL 200mm

    MRL 200mm

    • Manufacturer: MRL

    MRL 200mm SINGLE TUBE FURNACE WITH CANTILEVER LOADER AND LAPTOP CONTROL

    Billerica, MA
  • no-image_en.png

    Sacmi FMS 2850/119.70 Industrial Furnaces & Oven

    • Manufacturer: Sacmi
    • Model: FMS 2850/119.70

    Good condition Sacmi FMS 2850/119.70 Industrial Furnaces & Ovens manufactured in 2007. Located in Italy and other countries. Click request price for more information.

    Italy
3839404142

Overview

Industrial furnaces and ovens are essential for various manufacturing processes, including metalworking, ceramics, and chemical production. These high-temperature units are designed for tasks such as heat treating, drying, and curing materials. They come in various sizes and configurations to meet specific industrial needs, offering precise temperature control and efficiency.

FAQ

What should I consider when buying an industrial furnace or oven?

Consider the temperature range, fuel type, size, and capacity requirements, as well as any specific features needed for your application. Checking the unit's energy efficiency and control systems is also crucial.

How do I ensure the industrial furnace or oven is shipped safely to my location?

Use a reputable transport service experienced in handling heavy industrial equipment. Ensure the unit is securely packed and that all components are well-protected against damage during transit.

What is the maintenance schedule for an industrial furnace or oven?

Regular maintenance includes inspecting and cleaning heating elements, checking temperature controls, and ensuring proper ventilation. Refer to the manufacturer's manual for specific maintenance tasks and intervals.