- Trusted Seller
10,000 lb Chambersburg model "L" Closed
used
- Manufacturer: Chambersburg CECO "L" Power Drop
Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...
Rockville Centre, NY - Trusted Seller
1986 25 ton Pahnke FM 25/64 Rail Bound, Max tongs
used
- Manufacturer: Pahnke
Lift tons: 25 tonnes | Max rds: 1,473 mm | Min rds: 609 mm | S-shift: 250 mm | Vertical stroke of tongs parallel to floor: 800 mm | Rail centers: 3,750 mm | Max turning circle of fully opened tongs: 2,058 mm | L...
Rockville Centre, NY - Trusted Seller
50kj Beche KGH 5.0B Short Stroke Hydraulic Die Forger
used
- Manufacturer: Beche
Additional info: The line consists of: - 50KJ Beche hammer - 150 t trimming press - Induction heater Max blows with nominal blow effect - 99 bpm Useful blows with nominal blow effect - 45 bpm Slide stroke - min 5...
Rockville Centre, NY - Trusted Seller
2020 CARER R45H2 AGV SPED 9,920 lbs capacity Remote controlled
used
- Manufacturer: Carer
Lift tons: 4.1 tonnes
Rockville Centre, NY - Trusted Seller
1989 Demag HSP 630/1600 63 tonne Carrying
used
- Manufacturer: Demag
Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection
Rockville Centre, NY - Trusted Seller
1976 1 tonne Dango & Dienenthal model AMP 1000
used
- Manufacturer: Dango & Dienenthal AMP 1000
Lift tons: 1 tonnes | Max rds: 400 mm | Min rds: 100 mm | Model number: AMP 1000
Rockville Centre, NY - Trusted Seller
26,400 lb (12 tonne) Lasco KGK 1600 Electro-
used
- Manufacturer: Lasco
Additional info and upgrades as follows: A new Anvil was installed in 2006 New Side Columns installed in 2013 were made of weldable alloy according to ISO TR 10809-2 standards Hammer total height is 10,600mm Die ...
Rockville Centre, NY - Trusted Seller
2,900 kg Lasco model KH 315
used
- Manufacturer: Lasco
Size: 2,900 kgs | Stroke: 1,100 mm | Ram l-r: 700 mm | Ram f-b: 700 mm | Anvil l-r: 700 mm | Anvil f-b: 700 mm
Rockville Centre, NY - Trusted Seller
100 ton Clearing HG-100-25 C-Frame
used
Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection
Rockville Centre, NY - Trusted Seller
2,500 ton Voronezh KB8344 Heavy
used
- Manufacturer: Voronezh
Available for immediate inspection Very Good Condition
Rockville Centre, NY - Trusted Seller
1970 250 ton Hatebur AMP-30 3-Die, 120ppm,
used
Dia: 40 mm | Tons: 250 tonnes | Builder: Hatebur | Part dia: 64 mm | Max cutoff length: 72 mm | Max die ejector: 70 mm | Min cutoff length: 19 mm | Max outer dia for combination parts: 55 mm | Max width across t...
Rockville Centre, NY - Trusted Seller
2,800mm x 600mm Wagner 125/80 Radial Axial
used
- Manufacturer: Wagner
Dia: 2,997 mm | Height: 600 mm | Builder: Wagner 125/80 | Radial: 113.4 tonnes | Axial: 72.6 tonnes | Min dia: 400 mm | Min ring height: 50 mm
Rockville Centre, NY - Trusted Seller
1995 740 ton AMD model 740-2630 Bar & Billet Shear,
used
- Manufacturer: AMD
Bar dia: 156 mm | Max sqr: 137 mm | Model #: 740-2630 | Force: 671.3 tonnes | Ram stroke: 457 mm | Net weight: 16,783 kgs
Rockville Centre, NY - Trusted Seller
300mm dia x 100mm height Mitsubishi
used
- Manufacturer: Mitsubishi
Additional info: Ring blank dia range: 52mm to 70mm Ring blank height: 110mm Main roll power: 37 kW Electrics: 220V/3/60 Edge roll O.D.: 29.5mm ~ 185mm Edge roll power: 37 kW Edge roll taper angle: 40º Medium rol...
Rockville Centre, NY - Trusted Seller
2200mm dia x 450mm height Wagner RAW
used
- Manufacturer: Wagner
Additional info: Radial Drive motor: 300hp Axial Drive motor: 200 hp
Rockville Centre, NY 
Stanko M418 Forging
used
- Manufacturer: Stanko
- Model: M418
Good condition Stanko M418 Forgings. Located in USA and other countries. Click request price for more information.
Europe
Tip: Enter manufacturer, model or keyword