Used Processing in Slovakia

(2006) Battenfeld HM 210/1000 S, 50 mm , robot Apex

• Manufacturer: Battenfeld

Model: HM 210/1000 S Clamping force: 210 t Distance between tie bars: 630 x 570 mm Mould height: 300 mm Daylight max. : 1050 mm Screw diameter: 50 mm Injection pressure: 2016 bar Injection volume: 491 cm3 ...

RESERVED Conveyor belt, 1180 mm x Lenght 4450 mm , NEW

new belt for sale 1 pc working Width 1180 mm x Lenght 4450 mm for transport: L 4450 x W 1350 x H 1000 mm, weight 300 kg Bosch profile adjustable rubber feet new, made in China (is not lable) It has a suppor...

RESERVED: (2001) Arburg 570 C 2000-350/300 - 2K, Arburg robot

• Manufacturer: Arburg

- Clamping force: 200 tons - Distance between tie bars: 570 x 570 mm - Ejector path: 176 mm - Mold height min./max. : 600 mm x 1250 mm - Screw diameter1: 35 mm - Screw diameter2: 30 mm - Injection volume 1: 134cm...

2003 Wittmann W632-0268 Linear robot for spare parts

• Manufacturer: Wittmann
• Model: W 632

Condition: for repair. Now non-functional - missing Y-axis drive - sold for spare parts X 900, Y 1600, Z 3000 mm, load capacity 20 kg (was on injection molding machine KraussMaffei 250 ton)

Engel Victory VC750/150 Tech Injection Molding Machine, only 39.000hours (2003)

• Manufacturer: Engel
• Model: Victory 750/150

Engel VC750/150 , tiebarless machine Controll panel: CC100 Clamping force: 150 t Plate dimensions: 750x520 mm Opening Stroke: 605mm Screw dia: 50 mm Max. swept wolume 393 cm3 Injection rate: 283 cm3/s Inj...

SUSAKI Mold loader trolley for injection molding SE350US QMC

• Manufacturer: SUSAKI NAGOYA JAPAN

chain drive system manual handle type movement speed 45 mm/rev stroke up and down 350 mm parameters: - trolley: L x W x H: 2 x 1.8 x 1.6 m, weight 1.5 t, MFG. NO. 0409-112-1 - charger dimensions on the palle...

RESERVED (2012) Arburg 375 V 500-100 (vertical)

• Manufacturer: Arburg
• Model: 375 V 500-100

Clamping unit: Clamping force: 50 Ton Opening force max KN/mm: 40/250 Mould height, fixed /variable min. Mm: 200 Platen daylight fixed/variable max. Mm: 450-550 Weight of movable mould half max kg: 230 Ejec...

RESERVED (2014) Arburg 375 V 500-170 (vertical)

• Manufacturer: Arburg

Clamping force: 50 ton Min. mould height: 200 mm Max. mould height: 550 mm Max. open daylight: 302 mm Opening stroke: 225 mm Round table diameter: 630 mm Ejector force: 70 kN Centering diameter of moving p...

RESERVED: Arburg 270 S 350-100 U (2010) Vertical, horizontal machine, only 31.000 hours

• Manufacturer: Arburg

Arburg universal machine possible to use in Horizontal also Vertical position. Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection...

Reserved: Arburg 1200 T 800-170 (2013, 80 tons) vertical SERVO Rotary table 1200mm

• Manufacturer: Arburg

Clamping force: 80 tons Mould height: 300 mm Distance between platens: 600 mm Table diameter: 1200 mm Screw diameter: 30 mm Injection volume: 85 cm3 Shot wight (PS): 77 g Equipment: Cores: 2x Heating zon...

Arburg 370 S 700-170 U (2010)

• Manufacturer: Arburg

Clamping force: 70 tons Distance between tie bars: 370 x 370 mm Platten dimensions: 510 x 510 mm Screw diameter: 30 mm Injection volume: 85 cm3 Shot weight (PS): 77 g Injection pressure: 2000 bar Equipment...

RESERVED: (2012) Arburg 275 V 250-70 (vertical)

• Manufacturer: Arburg

Clamping force: 25 tons Mould height: 150-220 mm Distance between platens: 375-475 mm Screw diameter: 18 mm Injection volume: 23 cm3 Shot wight (PS): 21 g Equipment: Cores: 3x Heating zones: 6x Weight 17...

2011 Moretto Dehumidifying XD3 T with Hopper Loader F3 F40 (RESERVED)

• Manufacturer: Moretto

drying set weight 57 kg

RESERVED: Arburg 420 C 1000-350 (2001)

• Manufacturer: Arburg
• Model: 420 C 1000-350

Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 40 mm Injection volume: 182 cm3 Shot weight: 153 g Working hours: 77.000 L x W x H 4700 x 1600 x...

1996 Arburg Allrounder 320 M 500 - 90, 50 t, missing system card

• Manufacturer: Arburg

NEGOTIABLE PRICE! Is sold in condion as is - Card: system missing Clamping force 50 t Srew 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 71 cmm Control...

Wittmann W 833 Injection Molding

• Manufacturer: Wittmann
• Model: W 833

Good condition Wittmann W 833 Injection Moldings available between 2011 and 2017 years. Located in Slovakia and other countries. Click request price for more information.