Used sewing machine

Wire injection machine HOCHREUTER

Motor SEW 3,7 hp; 3250/190 rpm at the exit, 300 V With SIEMENS control S5-100 U With impulse generator

1973 Shell moulding machine SHALCO U900

External dimensions: length 3900 mm, width 1900 mm, height 2100 mm 700/13 rpm, 1410/27 rpm Without control panel With belt outlet With hydraulic unit (400 V, 15 kW)

Screw convoyer 1600mm Ø 150mm

• Manufacturer: SEW; 0,12KW; 230/400V; 1380/5 U/min

External dimensions: Lenght: 2800mm; Width: ±400mm; Height: 420mm Usable dimensions: Lenght: 1600mm; Width: 150mm Motor: With 2 gearboxes and coupling for lifting 45°

Transport belt 6000 x 500mm

Moteur SEW, 2,2 KW, 220/380 V Ouitside dimensions: 6000mm x 750mm, h. 500mm | Inside dimensions: 6000 mm x 500 mm

Rubber pocket elevator, 5900 mm, straight

Gearmotor SEW, 0,25 kW 220/380 V, 1400/3,3 A Weight: ± 1000 kg | Outside dimensions: 6400 mm x 1100/800 mm | Useful dimensions: 5900 mm x 500 mm

Mixer for barrels for suspensions (coating )

Motor: 5;5 KW? 230/400 V, brand SEW, drive motor, 1455 / 339 rpm Motor ATEX

1985 Furan sand mixer AXMANN, with articulated arm 20 t/h

• Manufacturer: Axmann

Type: TMVG20, serial number : 4039 Construction year : 1985 , weight: ± 4500 kg Outside dimensions: length arm outstrech, width 1550mm, height 3900mm + 400mm heightened Motor rotation arm SEW, Type R60DT100LS4, 2...

Bunker with discharging conveyor ± 4,4 m³

Gear motor + brake SEW, type KA87TDVI32S4BMO/HF, 5,5 kW, 230/400 V, 1430 rpm, exit: 46 rpm 2 drums Ø 320mm Bunker equipped with PVC in the inside Rollings with rubber Bunker with frame and discharging conveyor Wi...

Mobile, motorized table with 4 load cellls

Ø 950 mm Gearmotor SEW, 1320/29 rpm, 220/380 V Fix load table, Ø 950 mm For load of 4000 kg

Swing eductor plate EIRICH, Ø 3000mm

• Manufacturer: Eirich

Year of construction: 1989, Weight : 1500 kg In very good conditio Gearmotor SEW type 720/12, 1460/23 rpm, 3,8/7,5 KW, 380 V Useful dimensions at the floor 1300 x 1300mm

Conveyor screw, 4500mm, Ø 250mm

Useful length 4500mm Gearmotor SEW, 2,2 kW, 1400/32 rpm, 230/400 V Chain drive Inlet 350 x 300mm Outlet 300 x 300mm

Coating mixer for vessel

Outside dimensions: Ø 800/600 mm, h. 2000mm (in working position) Gearmotor SEW, type : RF37D590L4/C, 1,5 kW, 230/400 V, 211 rpm (at the exit) With lifting ring

Labo drying furnacer MEMMERT 220°C

• Manufacturer: Memmert
• Model: UM200

Dimension: Width:: ±900mm ; Depth: ±3000mm; Hight: ±9000mm Motor: Brand: SEW ; Type: gearbox; 5,5KW; 380/660 V; 1430/108 r/min Temerature adjustable until 220°C Digital display Mobile separeted into 2 levels

Loading band, 4400 mm x 800 mm

External dimensions: length 5000 mm, width 2150 mm, height 2460 mm Useful dimensions: length 4400 mm, depth 800 mm, height 1600 mm With small loading hopper On ffet Gear engine SEW

Double rolls for foundry sand

Gearmotor SEW, type DFT100LS4, serial number: 02.100.1835.3.13, 2,2 kw, 220/380 V, exit reductor 75 rpm With two rolls turning opposite Length of the rolls 420mm On frame, with filling cone Pinion drive dry enter...