Used screw dosing machine

Screw dosing with a little bunker

Gearbox motor with speed regulation Type G22 G02- 10- VO/ DK 84- 200V 3308, 0,55 kW, 220/380 V, 1420 t/min With small pneumatic vibrating on the cone Screw not closed Speed exit 133 until 19 rpm Continuously

Screw dosing with sand hopper GERICKE

• Manufacturer: Gericke

Motor 1st screw: 0,11 kW, 220/380 V, type SG1-34/D056-10, serial number K8197603, 110 W Motor 2nd screw: 0.16 kW, 180 V, type SG1-34/NUP530-203, 160 W, 3000/445 rpm output With small cone Screw body mad of stainl...

Dosing screw Ø55mm

Dimensions screw 1: Lenght: 3650mm; Width: 230mm; Hight: 260mm Dimensions screw 2,3 &4: Lenght: 3000mm; Width: 230mm; Hight: 260mm Usabul dimensions: Lenght: 2500mm iin flex tube Ø55mm; with variable speed regula...

Dosing screw 450 mm SIMON

• Manufacturer: Simon

Motor LEROY SOMER , serial number 24499, 0,37 hp, 220/380 V, 1.43 / 0.88 A Gear motor with speed change Transmission between gear motor and screw through flat driving belts

Dosing screw Ø 100mm

External dimensions: Läge: ±3500mm; Breite: ± 300mm drive over gearmotor and chain.

Sall square tank EMDE with dosing screw

Motor first screw NORD, 0,25 kW, 220/380 V, 1330 rpm Lowest cone length 500 mm, below 150 mm With silence bloc, with vibration motor, with dosing screw, with a primary crusher above the screw (to break up the clu...

2016 Stainless dosing screw with small hopper

• Manufacturer: Omega

With long cable with agitator and level detector "full"

Dosing screw, Ø 45 mm, length 1350 mm

External dimensions: length 1850 mm, width 700 mm, height 1100 mm Engine: 0,75 kW, 220/380 V, type: drive, 1380 rpm With spare hopper, ± 100 l, rectangular Power transmission over V-belt Without control box With ...

Dosing screw inox 1050 mm, Ø 110 mm

• Manufacturer: SIETAN

Brand: SIETANWeight: ± 100 kgTotal length: 1750 mmInternal dimensions: length 1050 mm, Ø 110 mmMotor BAUER 0,37 kW; 1460/360 rpm (47.5 / 12) 380VDrive via chain and gear wheelDownstairs openWith strap for attachm...

Dosing screw, useful dimensions Ø 130 mm, length 1140 mm

Gear motor LEROY SOMER, LS90L3DP; 1,5 kW, 2 x 835/2800 rpm; 380 V With flange at the inlet and the outlet With coupling and brake

Transport and dosing worm screw, useful length 1000, Ø 150mm

Gearmotor LEROY SOMER, 1,1 kW, 910/33,3 rpm, 220/380 V Direct drive in line Inlet 140 x 140mm With control and drain cleaning cover under Ø 150mm Outlet Ø 150mm

Vibrating dosing conveyor, useful dimensions 430 mm x 160 mm x 90 mm

Brand SAPIC With adjusting screw for the vibration way With magnetic vibrator

Conveyor screw, 1450 x 105mm

• Manufacturer: SCHNECKENBAU

Type: TS200/5500, serial number: 01/2981 Useful dimensions: outlet: Ø105mm, inlet: Ø110mm Gearmotor SEW, type: FA37/GD190S4, 1,1 kW, 1400/ 59 rpm, 220/380 V Axle base between entrance and exit 1450mm Pipe Ø100mm ...

Screw mixer BORDEN, ± 2 t/h with 2 hoppers

With sand hopper, 2 compartments, contenance total ± 2,2 m³ on feet With extraction screw With additive bunker ± 0.22 m³ Wiht dosing screw and impeller The large bunker has 4 pneunamtic metering sliders The meter...

1996 Screw mixer WÖHR, 5 t, 1 swivelling arm

• Manufacturer: Wöhr

Engine: 12 kW, 400 V, 50 Hz, serial number: 345287 Continuous screw mixer WÖHR 3 pumps PTS-acid Beta-set Sand dosing slide With automatic sand dosing With 3 compartiment sand hopper on feet Control board SIEMENS ...