Processing » Foundry & Casting

Search By Manufacturer

Search By Country

Building Filters

18

Used s7 300

  • Trusted Seller
    2000 Central amin distributor LÜBER,

    2000 Central amin distributor LÜBER, 300 l

    • Manufacturer: Lüber

    Dimensions: Length: 1350mm; width: 900mm; height: 2290mm With SIEMENS S7 control system 3x400V; ±3kW; 50Hz With pump With flow meter

    Amel, Belgium
  • Trusted Seller
    Chromite sand separation plant GUT.,

    Chromite sand separation plant GUT., 4-stage

    • Manufacturer: G.U.T.

    With Siemens panel With pneumatic sand conveyor 18´% Quarz sand separation in 4 stages: Composed of: 1 x silo, 60t with cooler and magnetic particle separator 2 x sandconveyor 1 x silo, 25t, state 2-4

    Amel, Belgium
  • Trusted Seller
    2014 DISAMATIC 030 B-150

    2014 DISAMATIC 030 B-150

    • Manufacturer: DISA

    SIEMENS PLC S7-300 Without core setter With pattern changer manipulator

    Amel, Belgium
  • Trusted Seller
    Screw mixer for core sand

    Screw mixer for core sand REISAUS-BAUMBERG

    • Manufacturer: REISAUS-BAUMBERG

    With Two-chamber hopper ( 1,3m³) With screw and little hopper for additiv With acid pump With controlboard Automat SIEMENS S7 300 Mixer is swivelling by pneumatic cylinder Mixer screw:lenght: ±2000mm

    Amel, Belgium
  • Trusted Seller
    Screw mixer WÖHR 20-40t/h

    Screw mixer WÖHR 20-40t/h

    • Manufacturer: Wöhr

    Useful dimensions: Outlet: 2500mm; conveyor belt: 4000mm Control board SIEMENS S7 300, 400V 50Hz 2 pumps for acid/ hardener with flow measurement ENDRESS&HAUSER For furan sand 3 dosages for sand The 2 arms motori...

    Amel, Belgium
  • Trusted Seller
    2008 Core Shooter RÖPER FCS

    2008 Core Shooter RÖPER FCS 25 HV-K

    • Manufacturer: Laempe / Röperwerk

    Dimensions of core boxe vertical: 800 x 530 x max. height 750mm Wuth hydraulic unit, power 37 kW With electric control PLC SIEMENS S7-300 With 2x shot heads Table povement by gear motor and frequency converter Ga...

    Amel, Belgium
  • Trusted Seller
    Core shooter LAEMPE LL10

    Core shooter LAEMPE LL10

    • Manufacturer: Laempe / Röperwerk

    Dimensions: Length: 2100mm; Width: 2050mm; Height: 2080mm Stroke of side clamping: 275mm, max width between side clamping: 700mm Max core box dimensions: Width: 695mm; Depth: 700mm; Height: 480mm For vertical and...

    Amel, Belgium
  • Trusted Seller
    2016 Core Shooter LAEMP LFB

    2016 Core Shooter LAEMP LFB 25 - 40H, shooting volume 40 L

    • Manufacturer: Laempe / Röperwerk

    Core box dimensions: length 900mm, width 800mm, height 800mm Horizontal separated core boxes only With 2 side cylinders for core box blowing Outside dimensions: width 3200mm, depth ± 5000mm, height ± 3000mm With ...

    Amel, Belgium
  • Trusted Seller
    Core shooter RÖPER / GENTEN

    Core shooter RÖPER / GENTEN H2,5

    • Manufacturer: Laempe / Röperwerk

    Overhauled by GENTEN in 2014 Dimensions: Length: 1710mm; Width: 1290mm; Height: 2140mm Monobloc cabin Cabin with 3 doors secured by limit switches Pneumatic doors for core removal With discharge slide With origin...

    Amel, Belgium
  • Trusted Seller
    Core shooter RÖPER H25 completely

    Core shooter RÖPER H25 completely hydraulic

    • Manufacturer: Laempe / Röperwerk

    Shot volume 25l Dimensions (without cabin): Width: 2560mm; Depth: 2000mm; Height: 2800mm With cabin Hydraulic table With hydraulic side clamping With core extraction slide and ejector With hydraulic unit 30bar; 4...

    Amel, Belgium
  • Trusted Seller
    RÖPER H 2,5 overhauled and

    RÖPER H 2,5 overhauled and modernised

    • Manufacturer: Laempe / Röperwerk

    Preset of the height of the shooting head by handle With new gassing trolley With clamping system, origin RÖPER (2 mobile jaws, adjustable manually, pneumatic stroke ± 120 mm) Completely encased Side door with do...

    Amel, Belgium
  • Trusted Seller
    Double-joint arm screw mixer WÖHR,

    Double-joint arm screw mixer WÖHR, 20 t/h

    • Manufacturer: Wöhr

    Type: WDS, serial number: 356165 Outside dimensions: 8800 mm (stretched arm) x 1700 mm (feet), h. 3700 mm Distance between entry and exit: 7000 mm ( first arm 4500 mm., second 2500 mm. ) Motor SEW, type: RF87DT80...

    Amel, Belgium
  • Trusted Seller
    Automatic core shooter LAEMPE L10

    Automatic core shooter LAEMPE L10

    • Manufacturer: Laempe / Röperwerk

    All movements are hydraulic with hydraulic unit Vacuum side clamping, plates 700 mm x 200 mm Core extraction slide 380 mm x 300 mm With gassing plate Maximum core box dimensions: width ± 700 mm, depth ± 650 mm, h...

    Amel, Belgium
  • Trusted Seller
    2008 Gassing unit LÜBER LW

    2008 Gassing unit LÜBER LW FDA 1640i

    • Manufacturer: Lüber
    • Model: LW-FDA 1640

    Dimensions: Length: 1200mm; Width: 1000mm; Height: 2000mm Control Siemens S7 With pulse generator With stainless steel storage container 30 litres

    Amel, Belgium
  • Trusted Seller
    2000 Mixing plant for core

    2000 Mixing plant for core sand LÜBER 7,5t/h

    • Manufacturer: Lüber

    Complete installation with 2 core sand mixers Mixer capacity / filling volume: Both mixers are mobile With laterally movable weighing hopper With 1 sand silo 6m³ separated in 2 (for old and new sand) With 3 dosin...

    Amel, Belgium
12

Overview

Foundry and casting equipment encompasses the machinery and tools used in the process of metal casting. This includes furnaces to melt metal, molds to shape it, and various other machines to handle the molten material and finish the cast products. Foundries are essential in producing high-quality metal parts and components for a variety of industries, from automotive to aerospace.

FAQ

What should I consider when buying used foundry and casting equipment?

Check the equipment's age, condition, and maintenance history. Ensure it meets your production needs and complies with safety standards. Verify the availability of spare parts and technical support.

How do I ensure the safe shipping of foundry and casting equipment?

Use a specialized transport service with experience in heavy and sensitive machinery. Secure the equipment properly to prevent damage during transit.

What is the maintenance schedule for foundry and casting equipment?

Regular maintenance includes inspecting and cleaning furnaces, checking for wear and tear on molds, and ensuring all moving parts are lubricated and functioning properly. Refer to the manufacturer’s guidelines for specific maintenance intervals and procedures.