Used first machine

Equipex 400FE 15 3/4" Single Crepe Maker w/ Cast Iron Plate, 240v/1ph

• Manufacturer: Equipex

There is a protective enamel finish on the Equipex 400FE single crepe maker's cast iron plate, and a batter spreader is included to help operators make crepes. Users can thermostatically control the unit and set ...

Vibrating crusher 20 t/h, GENERAL-KINEMATICS, VIBRA-MILL VM160

• Manufacturer: General Kinematics

External dimensions : 3600 mm x 3450 mm, h. 3450 mm (built on its foot) Throughput for sand elemination on a grid (hole Ø 25 mm; oval slots: 90 mm x 15 mm), with cleaning visor, 2290 mm x 400 mm 3 vibrating motor...

2004 Articulated arm screw mixer EUROTEK, 20 t/h

• Manufacturer: Eurotek

External dimensions: length 6000 mm, width 1250 mm, height 3630 mm With turbo mixing screw 15 kW First arm transport belt with motorized rotation and pneumatic brake Regulated sand inflow by 4 pneumatic slides co...

Furan sand mixer articulated arm 15-18 t/h WÖHR

• Manufacturer: Wöhr

Completely overhauled in 2002 Jib length: 6500 mm, rotation arm1: 180°, arm 2: 270° Ø transport screw 248 mm, Ø mixing screw 201 mm, separate command board via Siemens computer S5 Filling height: 2300 mmm, overal...

Doublearm screw furanmixer IMF typ 32/25-30 , ± 25 t/h

Useful length inlet-outlet 6000 mm First arm equipped with belt conveyor and motorized pivoting Motor mixing scre 18,5 kW, 380 V

KUKA robot, CE

• Manufacturer: Kuka
• Model: KR 240

First arm length 1250mm Second arm length 1000mmm With control board With protective grids With roller conveyor With gripper

Articulated furan sand mixer IMF, 20 t/h

Type: T36/20S, serial number: 071/98 Turbo screw with gear motor 15 kW First arm is a belt conveyor with gear motor 0.75 kW Motorized with a gear-brake motor 0.37 kW Two with 2 gear wheel pumps (1 in ertalon and...

Continuous mixer WÖHR, 20 - 40 t/h, articulated mixing screw

• Manufacturer: Wöhr

Sand inlet height: 3058 mm, sand outlet height: 2000 mm Center distance arm1: 5000 mm, center distance arm2: 2000 mm First arm rotation by electric motor, second arm rotation by hydraulic motor

1991 Double arm screw mixer WÖHR, 15 t/h

• Manufacturer: Wöhr

Total length: 6000 mm, first arm 3500 mm, second mixing screw 2500 mm Inlet height: 1772 mm, outlet height: 1800 mm With 2 pumps, with mixing screw motor 5 kW, 720 rpm, 220/380 V Conveyor screw 5,5 kW, 220/380 V

Sall square tank EMDE with dosing screw

Motor first screw NORD, 0,25 kW, 220/380 V, 1330 rpm Lowest cone length 500 mm, below 150 mm With silence bloc, with vibration motor, with dosing screw, with a primary crusher above the screw (to break up the clu...

Turbo screw mixer AXMANN, double articulated arm, output 5t/h

• Manufacturer: Axmann

Type: TMEG5, serial number: 4914 Motor BAUER, ± 9 kW; 380 V delta First arm equipped with belt conveyor Second arm Turbomix, 7,5 kW; 710 rpm Dust exhaust above the sans outlet; 0,95 kW; 8500 m³/h

Mobile continuous mixer WÖHR, 20 - 40 t/h

• Manufacturer: Wöhr

Mixer length: 8.300 mm (first arm: 5.300 mm, mixer arm: 2500 mm) 2 pumps for furan sand Flow control (Endress & Hauser) Mobile on 1 rail on the ground and fixed on a side of building With loading belt, length 50 ...

1979 Furan sand mixer AXMANN, 20 t/h

• Manufacturer: Axmann

Type: TMGV20, serial number: 4686 Construction year: 1979, weight: 3000 kg 27 kW kW in all, 500/380 V Articulation mix arms, the first arm is motorized, if overhauled, then with a stronger turbo motor In the cust...

Double arm screw mixer WÖHR 5-10t/h

• Manufacturer: Bauer

External dimension: Lenght: 4200mm; Width: 1700mm Usable dimensions: First screw : 2050mm; Second screw: 1050mm Input dimension: 2300mm; output dimension: 1300mm Premix screw: 2,2KW; 380V; 1420 r/min Turboschneck...

Double-joint arm screw mixer WÖHR, 20 t/h

• Manufacturer: Wöhr

Type: WDS, serial number: 356165 Outside dimensions: 8800 mm (stretched arm) x 1700 mm (feet), h. 3700 mm Distance between entry and exit: 7000 mm ( first arm 4500 mm., second 2500 mm. ) Motor SEW, type: RF87DT80...