Used feeder

SUPPORT LEGS AND SPRINGS FOR FEEDER

• Manufacturer: SUPPORT LEGS AND SPRINGS FOR FEEDER

Support Legs and Marshmallow Springs.

Rotary Kiln, 5.5' X 32-1/2', Maxon Burner, Feeder - #4673732

• Manufacturer: Maxon
• Model: 400

Rotary Kiln, 5-1/2' diameter X 32 1/2 feet long shell. Product is fed by 7' long screw feeder and discharge is controlled by a Rotary Air Lock valve. Includes drum drive with motor and gear reducer. Equipped with...

AJAX-WYATT 3000 lb/hr double ram

• Manufacturer: Wyatt

3000 Lb/hr AJAX-WYATT DOUBLE RAM TILT INDUCTION FURNACE CASTING LINE (13085) MACHINE# 13085 MANUFACTURER - AJAX ELECTRIC FURNACE CORP. TYPE - 129 DOUBLE RAM TILT INDUCTION FURNACE MELTING FURNACE FURNACE CAPACITY...

Deluxe Cast Iron Waterer

This rugged water bowl is made of black enameled cast iron and can be counted on for many years of reliable livestock watering. Water is released into the bowl by nudging the orange cylindrical plastic nose 'padd...

Deluxe Cast Iron Water Bowl - High Flow

Our new high-flow water bowl combines the qualities of our time-proven AU82C water bowl with a high-flow water valve that delivers a full 5.8 gallons of water per minute at 40 PSI. Rugged bowl is made of black en...

2006 Pneumatic sand feeder, 75 l

With sand pipe bend With control equipment, 24 V Weight: ± 80 kg | Dimensions: width 1000mm, depth 800mm, height 1000mm | Contenance: 75 l | Working pressure: 8 bar

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side With declaration of conformity CE

2007 Sand feeder 31 liters, KLEIN

• Manufacturer: Klein

Inlet Ø 145 mm With control valves Inlet closure by cones Air supplied from below rather than from the pneumatic cylinder above Advantages: Lower air consumption per tonne and less wear and tear Maximum continuou...

2007 Sand feeder 31 liters, KLEIN

External dimensions (as double item): 1400 mm x 1000 mm, h. 1600 mm External dimensions (single item): 550 mm x 550 mm, h 1600 mm Sandinlet Ø 145 mm Sandpipe Ø 100 mm With control valves Sends air from below and ...

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side, with manuel valve With control box With declaration of conformity CE

Dust/sand feeder FAT, ± 30 l

Serial number: 1176, year of construction: 1989 With compressed air acceleration into the bottom Input Ø 205 mm, exit Ø 50 mm With pneumatic cone With control valves

1995 Pneumatic sand feeder FAT 500l

Sand feeder, brand FAT Capacity 500 litres 8 bar operating pressure With control unit

1995 Pneumatic sand feeder FAT 500l

Sand feeder; FAT brand Capacity 500 litres 8 bar operating pressure With control unit

Sand feeder FAT, capacity 1000 l CE

With 2 sensors, with cone valve at sand inlet Input Ø 190 mm Exit Ø 110 mm, air input 1", with CE badge

2007 Pneumatic sand feeder SEGAB, 288 l, CE

• Manufacturer: Segab

With pneumatic cone fastener Inlet Ø 160 mm Outlet Ø 100 mm With CE 0044