Used cleaning machine

2006 NASH V-PROCESS MOLDING EQUIPMENT

• Manufacturer: Nash

(2) 36" X 36" Flasks, 24" Height, Cleveland Vibrator Flat Vibrating Table Model FA-4848-RE-17-4(2) 48" X 48" with Variable Frequency Controller, 39" X 39" Steel Pattern Carrier, NASH Model TC-7 Vacuum Pump, Direc...

Ultrasonic cleaning bath 4L

• Manufacturer: Elma Transsonic

Extern dimensions: Profondeur: Ø300mm; Hauteur: 280mm Usable dimensions: Profondeur: 230mm; Hauteur: 130mm With ascillation controller HF 50KHZ Using contanence 4L ; With cable, plug and swith

Cleaning motorized brush for moulding plant

Motorized brush Driven by pulley, belt and flat gear In very good condition

Electric sweeper ADD-CLEAN, 750 mm

With its recharger Sweeper on 3 wheels 2321 working hours With 2 brushes The brushes moves upwards and downwards mechanically With 8 cartridges Wit vibrating motor With waste collection containers

Star PGT14IE Single Commercial Panini Press w/ Cast Iron Grooved Plates, 240v/1p

• Manufacturer: Star

Star PGT14IE Single Commercial Panini Press w/ Cast Iron Grooved Plates Top and Bottom, 240v/1ph Star PGT14IE Description The Star PGT14IE panini press is built with grooved cast iron plates to leave grill marks ...

Vibrating crusher 20 t/h, GENERAL-KINEMATICS, VIBRA-MILL VM160

• Manufacturer: General Kinematics

External dimensions : 3600 mm x 3450 mm, h. 3450 mm (built on its foot) Throughput for sand elemination on a grid (hole Ø 25 mm; oval slots: 90 mm x 15 mm), with cleaning visor, 2290 mm x 400 mm 3 vibrating motor...

Slotted casting machine (slotted casting machine) nRad Kummer GmbH

• Manufacturer: Kummer GmbH

A touchscreen operator interface for basic operation; PC-based software is used for process recipe creation and editing. Recipes are transferred to the nRad via network connection. nRad Porous Ceramic Chuck (50m...

Top filter for Silo

• Manufacturer: AM

Cleaning by motorised vibrations Dimensions: length 820 mm, width 680 mm, height780 mm | Engine: 0,18 kW; 220/380 V | Filter surface: ± 5,5 m²

Small sand hopper with dust cleaner ± 1m³

Without foot and plug Cleaning by vibraiting Filter (collector) DCE Unimaster Type UMA 100V N. 200468

Core sand mixing installation LAEMPE SM6 3t/h

• Manufacturer: Laempe / Röperwerk

Overhauled in 2018 by GENTEN With pneumatic sand flap With double volumetric resin and hardener dosing unit Horizontal mixing paddle Horizontal cleaning paddle

Rubberbelt conveyor, 4000 mm x 740 mm, flat

Rolls Ø 380 mm With guidance on the sides along the entire length, with cleaning blade on the belt conveyor, with solid construction Motor with angle gearbox

Tumble belt Shotblastmachine with rubberband and dust filter, OMSG

• Manufacturer: OMSG

External dimensions: 1900 mm x 1700 mm, h. 3450 mm (with elevator) Speed variable by frequence converter Motor for belt AC-MOTOR, 0,75 KW, 220 / 380 V, 1370 rpm Pneumatic filter cleaning Ventilator ELEKTRON, type...

Core sand mixing plant STEFFENS, type SM30

Boltmixer, fastmixer Volume testing device for sand With 2 pumps With control board SIEMENS S5 With powder support With pneumatic depletion flap Spare mixer (second-hand) With cleaning flap

Transport and dosing worm screw, useful length 1000, Ø 150mm

Gearmotor LEROY SOMER, 1,1 kW, 910/33,3 rpm, 220/380 V Direct drive in line Inlet 140 x 140mm With control and drain cleaning cover under Ø 150mm Outlet Ø 150mm

2001 Core sand mixing plant LAEMPE SM5; 5,5t/h

• Manufacturer: Laempe / Röperwerk

Dimensions: Length: 2300mm; Width: 1200mm; Height: 2500mm Mixing bucket: Ø380mm; height: 600mm = ±65l With resin and hardener dosing Horizontal mixing paddleHorizontal cleaning paddleMotor power: 7,5KW Without el...