Building Filters
2001 STEFFENS Schnellmischer SM-30
- Manufacturer: STEFFENS
Batch max. 30 l/45 kg, container Ø 400 mm, dual mixing principle: side and bottom mixing arms, capacity approx. 1 t/h, drive power 4 kW, connected load 380 V, 50 Hz, pneumatic closure, safety limit switch, contro...
Meinerzhagen, Germany1986 STEFFEENS DUO-MIX 1
- Manufacturer: STEFFEENS
Batch max. 80 l/120 kg, container Ø 600 mm, dual mixing principle: side and bottom mixing arms, capacity 2-3 t/h, drive power 4 kW, connected load 380 V, 50 Hz, pneumatic closure, safety limit switch, control wit...
Meinerzhagen, Germany- Trusted Seller
RÖPER H 2,5 overhauled and modernised
Preset of the height of the shooting head by handle With new gassing trolley With clamping system, origin RÖPER (2 mobile jaws, adjustable manually, pneumatic stroke ± 120 mm) Completely encased Side door with do...
Amel, Belgium - Trusted Seller
1998 Core shooter LAEMPE LB20
- Manufacturer: Laempe / Röperwerk
Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...
Amel, Belgium - Trusted Seller
Core shoter Röper-Lämpe LKV H12
- Manufacturer: Laempe / Röperwerk
Fully pneumatic machine With height adjustment of the table by means of a crank With slide rail for inserting the lower part of the core box into the machine With ejector plate below the core box With side clampi...
Amel, Belgium - Trusted Seller
1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3
- Manufacturer: Laempe / Röperwerk
Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...
Amel, Belgium - Trusted Seller
1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3
- Manufacturer: Laempe / Röperwerk
Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...
Amel, Belgium - Trusted Seller
RÖPER H12 overhauled and modernized
Shot volume: 12 litersTable: 400 mm x 700 mmPresetting of the table height with hand crankWith new gassing slideWith original RÖPER clamping system(1 fixed clamping jaw, 1 pneumatic clamping jaw, stroke ± 20 mm, ...
Amel, Belgium - Trusted Seller
Slotted casting machine (slotted casting machine) nRad Kummer GmbH
- Manufacturer: Kummer GmbH
A touchscreen operator interface for basic operation; PC-based software is used for process recipe creation and editing. Recipes are transferred to the nRad via network connection. nRad Porous Ceramic Chuck (50m...
Erfurt, Germany 
ROPERWERK FOUNDRY CORE SHOP
- Manufacturer: Laempe / Röperwerk
The Core Shop is part of a copmplete Foundry Plant for manufacturing maleable galvanized fittings. The plant is new not commissioned , part of the equipment is installed and part is stil in crates. FOUNDRY CORE ...
Romania- Trusted Seller
2014 Core shooter LAEMPE LL10
- Manufacturer: Laempe / Röperwerk
Core shooter: Shooting volume: 15 litres (was expanded later for larger shot volumes) Dimensions of the machine: Length: 2100mm; Width: 2050mm; Height: 2080mm For horizontally and vertically separated core boxes ...
Amel, Belgium - Trusted Seller
Angle of cast iron - 1155/200 / H160 mm 24577
- Manufacturer: Guss
clamping angle, clamping aid -side stop rails Angle off: aluminum | Clamping angle for: Workpiece clamping | Dimensions: 1155/200 / H160 mm | Mass: 22 | Internal storage: 3C30105
$457 USDWiefelstede, Germany - Trusted Seller
Gravity die casting machine for mould separate in 4 parts
Dimensions: Length: 2950mm; Width: 1000mm; Height: 2650mm Without clamping plates Hight adjustable side clamping without gides For multi-part moulds (2 to 4-part moulds) Mould height: min ±300mm; max: ± 900mm Wit...
Amel, Belgium - Trusted Seller
Gravity casting machine, useful dimensions 650 x 650mm
Dimensions: Length: 3100mm; Width: 900mm; Height: 1400mm Horizontal swivelling
Amel, Belgium - Trusted Seller
Pyrometer Digilance II HERAEUS ELECTRO NITE
- Manufacturer: Heraeus - Hanau - Vötsch
With battery and charger 9 V Weight: 3kg | Length without handle: 1260mm (bent side 400mm)
Amel, Belgium
