Used Saws

2006 Selco CNC Beam Panel saw

• Manufacturer: Selco

“Used, in good condition. We have not used this saw ourselves but were told it was in working when taken out of service. Some of the photos show when it still installed & others when it was in storage. ” 2006 Sel...

Northtech NT CS20L-1034 20″ 10HP Upcut Saw (Left-Hand Cut) 460V

This innovative up-cut saw from Northtech quickly and safely cut boards up to 15-1/2 inches wide or 5-3/4 inches high. The powerful 10 HP soft-start motor and 20″ diameter blade reliably produce clean and consist...

Northtech NT CS30R-1532 30″ 15HP Upcut Saw (Right-Hand Cut) 230V

This innovative up-cut saw from Northtech quickly and safely cut boards up to 27-3/4 inches wide or 10-3/8 inches high. The powerful 15 HP motor and 30″ diameter blade reliably produce fast and consistent results...

Northtech NT CS30L-1534 30″ 15HP Upcut Saw (Left-Hand Cut) 460V

This innovative up-cut saw from Northtech quickly and safely cut boards up to 27-3/4 inches wide or 10-3/8 inches high. The powerful 15 HP motor and 30″ diameter blade reliably produce fast and consistent results...

Northtech NT CS30L-1532 30″ 15HP Upcut Saw (Left-Hand Cut) 230V

This innovative up-cut saw from Northtech quickly and safely cut boards up to 27-3/4 inches wide or 10-3/8 inches high. The powerful 15 HP motor and 30″ diameter blade reliably produce fast and consistent results...

Clausing Kalamazoo #9656-P - Clausing Kalamazoo V2012F Saw #9656-P

• Manufacturer: Clausing
• Model: V2012F

Clausing Kalamazoo 20″ Vertical Band Saw with Fixed Tilting Table, V2012F Inventory # 9656-P Rip Fence Magnetic starter with 110v control circuit and overload protection 3 HP TEFC motor Dual range transmission 26...

1997 W.F. Wells W-9-1

• Manufacturer: W.F. Wells
• Model: W-9

9" x 18" W.F. WELLS SEMI-AUTOMATIC HORIZONTAL BAND SAW, Model W-9-1, Double Column, 3 HP, 380 SFPM, Coolant Pump, New 1997. Semi-Automatic Sawing Features with Control, Controlled Blade Speed, Blade Powered Clean...

2001 DITCH WITCH ZH440 Rock wheel Rock Saw

• Manufacturer: Ditch Witch

ZH440 Rock Saw. Fits Ditch Witch 410sx. Fuel: Diesel | Orientation: Walk-Beside

Northtech NT-UCS24 (24″) 15HP Upcut Saw (Right or Left) 230/460V

This innovative up-cut saw from Northtech quickly and safely cut boards up to 21 inches wide or 8 inches high. The powerful 15 HP motor and 24″ diameter blade reliably produce clean and consistent results. Up to ...

Kalamazoo FS-350 Cold Saw

• Manufacturer: Kalamazoo
• Model: FS 350

Can be seen under power Video Player Use Up/Down Arrow keys to increase or decrease volume.

Amada/Marvel SA330WPC Mitering Saw

• Manufacturer: Amada

NEW Amada/Marvel Model: SA330WPC Horizontal Mitering Saw SPECIFICATIONS & FEATURES Capacity Blade at 90 degress Rectangular - 13” H x 16” W (330 mm x 406mm) Round - 13” (330 mm) Minimum Remnant 9” Blade at 45 deg...

LOCKFORMER 24-S Bett-Mar Band Saw

• Manufacturer: Lockformer

High Quality Lockformer Band Saw Throat - 24" Blade Width - 0.375" 3 speed - 100 FPM, 600 FPM & 3000 FPM Power Input - Wired 110 Volt, Single Phase Power Output - 0.8 HP, 1800 RPM Dimensions - 44" L x 24" W...