Used Saws

2013 TSUNE Circular Saw

• Manufacturer: Tsune

Chip Conveyor Mist Buster as pictured Color CRT on the fly length correction output sorting, drop off etc. Blade lubrication Wear resistance Carbide blade guides Set up wizard Carbide tipped Blade Barfeed length ...

Victory 15″ Radial Arm Saw

This is a rather rare saw made by “Victory Motors Inc. during World War II based on a DeWalt design. With that said this is a pretty cool radial and a part of woodworking history. 5hp 230/460V/3-Phase. 1″ arbor ...

MSC #9493 - MSC Vertical Band Saw #9493

• Manufacturer: MSC

MSC 18″ Vertical Band Saw with Blade Welder Inventory # 9493 Blade Welder with Grinder Tilt Table

Whirlwind 212R 18″ Upcut Saw

• Manufacturer: Whirlwind

This is a very clean system from a smaller shop. This Whirlwind is Right Handed and powered by a 10 hp Baldor 208-230/460V/3-Phase motor with an 18″ blade capacity. 1″ diameter saw arbor, Overhead safety guard/ho...

FMB #9779 - FMB Antares Band Saw #9779

• Manufacturer: FMB

FMB Antares 7 7/8″ Manual Pull Down Double Miter Band Saw Inventory # 9779 Up to 60° Miter to the Right and 45° Miter to the Left Manual Pull Down Vise is Stationary for Left and Right Miters

LOT OF NAP GLADU SAW BLADES

LOT OF NAP GLADU SAW BLADES PA-SBs-001a 7-3/4" diameter, 1-3/4" bore, 32 tooth saw blade PA-SBs-001b 7-3/4" diameter, 1-3/4" bore, 32 tooth with wax coating saw blade PA-SBs-001c 7-3/4" diameter, 1-3/4" bore, ...

KMT #9727 - KMT Saw C 370 SA #9727

• Manufacturer: KMT
• Model: C370

KMT Saw 14 1/2″ Vertical Column Semi-Automatic Cold Saw, C 370 SA Inventory # 9727

Wellsaw #9723 - Wellsaw 613 Band Saw #9723

• Manufacturer: Wellsaw

Wellsaw 6″ x 13″ Manual Metal Cutting Band Saw, 613 Inventory # 9723 Made in USA Hydraulic feed control with adjustable counterbalance spring Ball-bearing blade guides Perimeter ring gear blade drive Baldor motor...

1994 12" x 12" Do-ALL Model C-305A Automatic Horizontal Band Saw ()

• Manufacturer: DoAll
• Model: C-305A

Imperial Metric Do-ALL Model C-305A 12" x 12" Automatic Horizontal Band Saw Equipped with: Coolant system integral coolant pump Motion detector Up-Down Hydraulic Cylinder Flushing hose Discharge tray with coolant...

Laguna P14|12XC Panel Saw

• Manufacturer: Laguna

Introducing Laguna’s most industrial panelsaw ever! The new P14|12XC has motorized rip fence adjustment and powered blade tilt, raise and lower all operated with CNC touch-screen control. The P14|12XC also has th...

Powermatic #9833 - Powermatic 712H Band Saw #9833

• Manufacturer: Powermatic

Powermatic 7″ Horizontal Band Saw, 712H Inventory # 9833

Northtech NT 600A Vertical Band Saw

The Northtech NT 600A Vertical Bandsaw has a 7.5 HP motor, 2” x 208″ blade, and a maximum cut thickness of 13-12″. The 23-3/4” x 26” cast iron worktable is tiltable up to 60 degrees and features a 3-3/4” x 18” fe...

LeTarte EM11KA Aluminum Double Miter Saw 1.5HP Motors Dual Blades 230/460V 3Ph

• Manufacturer: LeTarte

Used, in Good Working Condition, Tested OK. 11" and 10.5" blades. Wired for 230V. If this item ships as Flat Rate Freight please see details in Shipping tab