Used Saws

ERWTech/UCG High-Speed Flying Cold Saw, Double-Cut #New ERWTech Cold Saw Double Cut

Our new cold saws are offered in both single and double-blade versions, accommodating sizes of up to 273 mm maximum outer diameter. With cutting speeds reaching up to 300 feet per minute (FPM), each saw is equipp...

7-1/4" SAVAGE ALUMINUM PLATE SAW 12037B

• Manufacturer: Savage

MODEL #: N/A SERIAL #: N/A 7-1/4" MAXIMUM THICKNESS 24" BLADE DIAMETER 12' CUTTING TRAVEL 48" POWER GAUGING 4 HOLD DOWNS 6" x 12" CUTTING TABLE POWERED FEEDS NEWER CONTROLS BY SHARP YEAR: 1999 15HP 230/460 19'...

CS-350 Cold Saw, 14", Variable Speed

• Manufacturer: Precision Matthews
• Model: CS-350
• Weight: 630 lb

Operates on 220V Single Phase Power VARIABLE BLADE SPEEDS for the best cutting speed to match the job from 24-120 RPM Quick Acting lever for angle changes, can be done in only a few seconds This saw has a 90 degr...

CS-315 Cold Saw, 12.5", Single Speed

• Manufacturer: Precision Matthews
• Model: CS-315
• Weight: 415 lb

Operates on 220V Single Phase Power Quick Acting lever for angle changes, can be done in only a few seconds Quick Acting vise lever, for faster operation on multiple cuts of the same size Miters 45 degrees, both ...

CS-315V Cold Saw, 12.5", Variable Speed

• Manufacturer: Precision Matthews
• Model: CS-315V
• Weight: 535 lb

Operates on 220V Single Phase Power Variable Speed from 15-120 RPMs allow user to dial in blade speed to the job for even better performance Quick Acting lever for angle changes, can be done in only a few seconds...

Matrix II Bi Metal Saw Blade, 8/12 TPI, 3/4x.035x93

• Manufacturer: Precision Matthews
• Weight: 1 lb

Pre Welded, Sized to fit our PM-712G Band Saw, and many others Use this 8/12 tooth blade for general purpose cutting of many different shapes and sizes Variable blade pitch offers more efficient cutting action wi...

NEW FMS FCS-76-4 FLYING CUT-OFF COLD SAW; REF. NO. M1240

• Manufacturer: Freedom

Model: FMS FCS-76-4 Cutting Type: Cold Saw Cutting Type, Leaves no or minimum burr at the tube end Hands of Operation: Dual Direction - Hand of Operation Line Center Level: To be determined Production Capability...

Matrix II Bi Metal Saw Blade, 6/10 TPI, 3/4x.035x93

• Manufacturer: Precision Matthews
• Weight: 1 lb

Pre Welded, Sized to fit our PM-712G Band Saw, and many others Use this 6/10 tooth blade for thicker materials, solid rounds, solid rectangles, etc. Variable blade pitch offers more efficient cutting action with ...

Matrix II Bi Metal Saw Blade, 10/14 TPI, 3/4x.035x93

• Manufacturer: Precision Matthews
• Weight: 1 lb

Pre Welded, Sized to fit our PM-712G Band Saw, and many others Use this 10/14 tooth blade for thinner wall materials, tubing, and structural shapes Variable blade pitch offers more efficient cutting action with l...

5 FMS FLYING CUT-OFF SAW

SPECIFICATIONS EQUIPMENT SUMMARY Condition: As is.

24" x 16" CHEN LONG DOUBLE COLUMN HORIZONTAL BAND SAW Z25010B

• Motor: 5.5 kW

Rectangle: 24" w x 16" Round: 16" Diameter Square: 16" x 16" Power Feed (variable speed) Power Clamping Entrance and Exit Roller Tables (powered exit table) Entrance Table Size: 25.5" wide x 15' long Exit ...

Kalamazoo K16-18 Industrial Cutoff Saw

• Manufacturer: Kalamazoo
• Model: K16-18
• Motor: 10Hp TEFC 3-Phase
• Weight: Approx. 620lbs (shipping weight)

Unit is USED - BUT IN LIKE NEW CONDITION - UNIT WAS NEVER USED IN PRODUCTION - ONLY TEST CUTS WERE MADE - FACILITY CLOSED BEFORE SAW WAS PUT INTO PRODUCTION. There are some visible minor surface scratches and som...

5″ (127mm) ERWTech/UCG High Speed Flying Cold Saw #P24-010

P24-010 ERWTech/UCG 2024-HSCS-127/99/3 2024 Touch Screen Controls Length Measurement System Universal Warehouse, Perrysburg, Ohio Our new cold saws are offered in both single and double-blade versions, accommodat...

W.F. Wells W-9 Horizontal Saw

• Manufacturer: W.F. Wells
• Model: W-9

Description WF Wells 9″ x 17″ Horizontal Saw, Model W-9 Asset # 17100 Serial # 24764 Specifications: Capacity @ 90°: Rectangular 9″ H x 18″ W, Round 9″ Blade Speed Range: 70 – 380 SFPM Blade Width: 1″ Blade Lengt...