Used Machine Tools in Thuringia, Germany

1984 HYLATECHNIK HESSP 100 1.5 XA4
- used
- Manufacturer: Hylatechnik
- Fine stroke adjustment - Cutting shock damping - Oil extraction - 2 cylinders - Roll feed from Dreher, type WAV, control PMS3000 from Dreher - Soundproof booth - Machine was overhauled in 2001 and equipped with...
Schmölln, Germany
AMBOLD PEEV 25.4
- used
- Manufacturer: ambold pressen- und maschinenbau
- Ortlinghaus hydraulic clutch-brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - Control cabinet with touchscreen - foot switch
Schmölln, Germany
1988 HELMERDING ERH 100 B
- used
- Manufacturer: HELMERDING
Equipment: - Final drive - shaft with 3 bearings - Semi-automatic stroke adjustment - circulating oil lubrication - Hydraulic clutch - Separate hydraulics with oil cooler The machine is partially overhauled by us...
Schmölln, Germany
1990 HYDRAP HPSK-100 CNC
- used
- Manufacturer: ambold
- Ejector in the table, pressure force 40 t, stroke 100 mm - laterally movable work area guarding with BWS (light barrier) this with cycle operation - Cooling, behind the machine, accumulation water tank (beige) ...
Schmölln, Germany
WANZKE GMD I
- used
- Manufacturer: ambold pressen- und maschinenbau
- Motorized double-turn reel - newly painted Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Coil weight: 2 x 0.15 t | Span area: 265 - 485 mm | Bandwidth: 200 mm | Tape streng...
Schmölln, Germany
1997 ZEULENRODA PED 100/3
- used
- Manufacturer: Zeulenroda
- Model: PED 1003
- Increased installation height - with draw cushion - converted to safe control (Pilz PLC), safe for manual insertion work on the open mold
Schmölln, Germany
BAD SALZUNGEN MHD 250/4
- used
- Manufacturer: ambold pressen- und maschinenbau
unbraked reel with pressure roller new painted Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 250 mm | Coil weight: 2.5 t | Inner coil diameter: 450 - 530 mm | Sh...
Schmölln, Germany
1987 GSW SCHWABE LHM 80/650
- used
- Manufacturer: Herman-Schwabe
motorized reel Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 150 mm | Coil weight: 80 kg | Outer coil diameter: 650 mm | Thorn height: 1000 mm | Expansion area: ...
Schmölln, Germany
1977 SMERAL LENP 40 A
- used
- Manufacturer: Šmeral Brno
- Model: LENP 40 A
- gear train - tiltable - table platen - mechan. Overload protection in the ram (break plate) - pneum. clutch
Schmölln, Germany
1978 MÜLLER CD 63.12.14
- used
- Manufacturer: Muller
- workspace enclosure with Sick light barrier - large plunger with ejector and trunnion clamping piece - foot switch - motorized depth stop in cylinder
Schmölln, Germany
KEPROMA AG DOD 40/100
- used
- Manufacturer: ambold pressen- und maschinenbau
- Demonstration model with branded overhauled control system - NC roll feed servo power with direct drive - plasma nitrided rolls - backlash free drive - strip side guide Performance data at 180 degrees - 1000 st...
Schmölln, Germany
1986 JELSINGRAD BPA 15
- used
- Manufacturer: Jelsingrad
Run only 2 years High-speed Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 015 t | Installation height: - mm | Hubzahlen per minute: 200 - 2000 | Table surface: - mm...
Schmölln, Germany
1977 DUNKES ESPZ 63/28
- used
- Manufacturer: Dunkes
- Model: ESPZ 6328
- Draw cushion Press not safe for manual insertion work
Schmölln, Germany
1981 MÜLLER SZ 40.30.1
- used
- Manufacturer: Muller
- Model: SZ 40301
with hydr. Die cushion speeds: Rapid advance speed 240 mm / s continuously adjustable
Schmölln, Germany
Lathe GEMA
- used
- Manufacturer: Gema
1 piece lathe GEMA with various accessories, according to pictures and inspection, self-disassembly
Hausen, Germany