Used hammer

2023 ANDROMAT HH3 PNEUMATIC HAMMER

• Manufacturer: ANDROMAT

Andromat Hammer, Model HH3, 6 Bar, 87 psi, 1030 Lb-Ft Energy, 500 Lb Shipping Weight, UNUSED, New in Original box

Hammers

5 items

8,000 lb Erie Drop Forging Hammer, Re:25971

• Manufacturer: Erie Press Systems

Dismantled and moved to storage Very good working condition

6,200 kg Nittan Air Forging Hammer, Model ADH-60-I,

• Manufacturer: Nittan

Additional information: Standard dropping section weight (upper mold not included) (kg): 6200 Standard upper section weight(Nominal value) (kg): 1800 Stroke（ｍｍ）: 1300 Cylinder diameter: 580 mm Piston diameter: 21...

Drop-Hammer-100-LBS

"Normal wear from use, needs a good cleaning. some rust. broken valve handle." Weight...2380lbs. Height...93″Floor footprint...28″ L-R, 22″ F-B. Currently bolted onto a steel plate that is 22″x22″x1″ thick. The a...

CHAMBERSBURG 6K Forging Hammer

• Manufacturer: CHAMBERSBURG

6,000 Lb. Chambersburg Forging Hammer Asset type: 66320

CHAMBERSBURG 12K Forging Hammer

• Manufacturer: CHAMBERSBURG

12,000 Lb. Chambersburg Forging Hammer Asset type: 66320

NAZEL 4B 600LBS Blacksmith Power Forging Hammer Pneumatic Self-Contained

"Normal wear from use but that- OVER 30 years ago, and since then- always kept in dry storage. You MUST read the history of it below. Great condition with smooth ram cylinder surface. i.e. no scoring. It will nee...

17,000 lb (7,800 kg) Eumuco Electro-

• Manufacturer: SMS Eumuco

Additional info: Work resulting a blow: 10,000kgm (real 80,000kgm) Height of fall: 590mm Weight of ram hammer: 7,800kg Shut height: 330~660mm Clearance distance between guidance: 940mm Depth of ram hammer: 1,000m...

26,400 lb (12 tonne) Lasco KGK 1600 Electro-

• Manufacturer: Lasco

Additional info and upgrades as follows: A new Anvil was installed in 2006 New Side Columns installed in 2013 were made of weldable alloy according to ISO TR 10809-2 standards Hammer total height is 10,600mm Die ...

40,000 kg Schloemann (Beche) CounterBlow Forging

• Manufacturer: Schloemann (Beche) DGH 40

Size: 40,000 kgs | Stroke: 1,250 mm | Ram l-r: 3,200 mm | Ram f-b: 3,000 mm | Bpm: 80 | Anvil l-r: 3,000 mm | Anvil f-b: 4,800 mm | Between the guides: 1,200 mm | Total hammer weight: 235,000 kgs | Floor space l...

50kj Beche KGH 5.0B Short Stroke Hydraulic Die Forger

• Manufacturer: Beche

Additional info: The line consists of: - 50KJ Beche hammer - 150 t trimming press - Induction heater Max blows with nominal blow effect - 99 bpm Useful blows with nominal blow effect - 45 bpm Slide stroke - min 5...

10,000 lb Chambersburg model "L" Closed

• Manufacturer: Chambersburg CECO "L" Power Drop

Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...

10 tons Hammer Forging Hydraulic Line KGK1600

• Manufacturer: Lasco

1) Hydraulic Forging Hammer Make : Lasco, Model : KGK1600, Blow capacity : 16,000 kgm, Capacity of continuous blow/minute : 60 to 70, Blow high with standard die : 1100 mm, Hammer total weight : 287 tons, ...

GFM SXL 40 Radial Forging Machine

• Manufacturer: GFM

Reconditioning by GFM 1991 from 650 Ton per Hammer to 800 Ton per Hammer Machine Dimension: Axis height of forging above the hall level - 750 mm Maximum height of machine above the hall level - 2,950 mm Maxim...