Used Forging in France

2950 kg PILKINGTON FORGING DRUM HAMMER

Falling height: 1000 mm | Weightof falling ram: 2950 KG | Way between uprights: 750mm | Weight of anvil: 24T | Total weight: 40T | Total height: 5000 mm

1600 Kg/m FORGING HAMMER BANNING GOA 1250

• Manufacturer: Banning

Energy of blow: 1600 Kg/m | Stroke: 440 mm | Distance between slides: 450 mm | Minimum height of die: 220 mm | Maximum weight of upper die: 250 Kg | Stroking rate: 140 s.p.m | Height above the ground: 2900 mm | ...

3150 Kg/m LASCO KH 315 FORGING HAMMER

• Manufacturer: Lasco

Energy of blow: 3150kgm | Falling height: 1100mm | Weightof falling ram: 2900kg | Max. weight of die: 530KG | Way between slides: 700mm | Motor power: 40KW | Weight of anvil: 34T | Total weight: 64T | Total heig...

5000 Kg/m FORGING HAMMER BANNING GOA 4000

• Manufacturer: Banning

Year: 1990 | Energy of blow: 5000 Kg/m | Stroke: 540 mm | Distance between slides: 600 mm | Minimum height of die: 300 mm | Maximum weight of upper die: 800 Kg | Stroking rate: 125 s.p.m | Height above the groun...

6300 Kg/m FORGING HAMMER BANNING GOA 5000

• Manufacturer: Banning

Energy of blow: 6300 Kg/m | Stroke: 560 mm | Distance between slides: 650 mm | Die seat in ram: 630 mm | Die seat in die holder: 950 mm | Stroking rate: 115 r.p.m. | Height above the ground: 3530 mm | Total heig...

10500 Kg/m FORGING HAMMER HUTA ZIGMUNT MPM 10000

Year: 1992 | Retrofit: 2009 | Energy of blow: 10500 Kg/m | Stroke: 1000 mm | Distance between slides: 600 mm | Die seat in ram: 750 mm | Die seat in die holder: 1050 mm | Maximum weight of upper die: 1100 Kg | S...

3600 Kg/m HUTA ZIGMUNT MPM 3150 FORGING HAMMER

Year: 1990 | Energy of blow: 3600 Kg/m | Stroke: 800 mm | Distance between slides: 550 mm | Die seat in ram: 500 mm | Die seat in die holder: 700 mm | Maximum weight of upper die: 500 Kg | Stroking rate: 110 s.p...

7000 Kg/m FORGING HAMMER HUTA ZIGMUNT MPM 6300

Year: 1990 | Energy of blow: 7000 Kg/m | Stroke: 850 mm | Distance between slides: 650 mm | Die seat in ram: 650 mm | Die seat in die holder: 900 mm | Maximum weight of upper die: 800 Kg | Stroking rate: 100 r.p...

3600 Kg/m HUTA ZIGMUNT MPM 3150 FORGING HAMMER

Energy of blow: 3600 kg.m | Weight of falling ram: 1250 Kg | Max. tup stroke: 800 mm | Spacing guideway: 550 mm | Length of die seat in the tup: 500 mm | Length of die seat in the cushion: 700 mm | Min. height o...

40000 Kg/m COUNTER STRIKE HAMMER SPADE / SCHLOEMANN DGH40

Energy of blow: 40 000 Kg/m | Ram stroke: 1450 mm | Max. stroking rate: 80 s.p.m | Average stroking rate: 6 s.p.m | Upper ram weight: 43T | Lower ram weight: 47T | - cold air: 5,3 m3 | - hot air 220°c: 3,2 m3 | ...