Building Filters

Used Boring Mills in Tokyo, Japan

Boring Rod
- new
- Manufacturer: TOHO CHIKAKOKI
The boring rod is a hollow steel tube that transmits the rotation and feed pressure of the boring machine to the bit at the end and conducts the boring water, which is essential for boring, to the bit.
Tokyo, Japan
DU-4×S3 (Boring machine DU type)
- used
Please refer to the attached PDF file for specifications. For details, please contact the Fukuoka Sales Office.
Tokyo, Japan
Spindle type D type
- new
This is a compact and lightweight model. It is easy to disassemble, transport, and reassemble, and is used for all types of boring work, including survey boring, injection work, and small wells, even in small wor...
Tokyo, Japan
Top drive type K type
- new
Equipped with a drill head for double-tube drilling with an inner tube rod and outer tube casing, and with a unique inner tube slide mechanism unique to the K-type, this machine is effective in drilling collapsib...
Tokyo, Japan
Spindle type DH type
- new
Medium to large size models. Equipped with ample supply pressure, balancing force, and torque, they are used for foundation piles, landslide control piles, and well boring. A hydraulic chuck is standard equipment...
Tokyo, Japan
Low head type DW type
- new
This boring machine is designed with a low swivel head height and is equipped with a hydraulic chuck as standard equipment, enabling safe and speedy rod loading and unloading operations. The small models are effe...
Tokyo, Japan
Spindle type DU type
- new
This medium to large size model has 6 forward and 2 reverse spindle speeds by switching between high and low gears. It excels in deep drilling such as deep well drilling, hot spring drilling, and exploratory surv...
Tokyo, Japan
CNC horizontal boring and milling machine Kurashiki KBT-15DX-ANP
- used
- Manufacturer: Kuraki
- Model: KBT15
Commodity id: 960601KIY-1 | Maker: Kurashiki Machinery Co. | Model year: 1992 | Specification: FANUC-15MA T:1600×1800 X-3000 Y-2000 Z-1300 W-700 B-0.001 Spindle center from table top: 0 to 1800mm 5 to 2000rpm BT...
Tokyo, Japan
Vertical Lathe Toshiba TD-40/ 65S
- used
- Manufacturer: Toshiba
- Model: TD40/65S
Commodity id: 930628KIY-1 | Maker: toshiba machine co. | Model year: 1996OH | Specification: φ6500 T:φ4000 Four jaws/placed jaw 0.8～40rpm (18 steps) AC75Kw (inverter) Loading weight: 50tons Rotational force: 16t...
Tokyo, Japan
CNC vertical lathe Toshiba TUD-16
- used
- Manufacturer: Toshiba
- Model: TUD16
Commodity id: 970323MIT-1 | Maker: toshiba machine co. | Model year: 2001 | Specification: F-150T-B φ2000×1800 ATC-12 pcs. Four-jaw chuck φ1600 1～300rpm 55Kw Loading weight：10,000Kg Rotating force: 21,570Nm Cutt...
Tokyo, Japan
1985 TOSHIBA TXN-13
- used
- Manufacturer: Toshiba
- Model: TXN13
FANUC-11T　φ1400×1000ｈ　ATC-12 4 jaw chuck φ1250×2APC 3.2～315rpm Load: 5000Kg Rotation force:1350Kg-m X-1230　Z-900　Cross-1000mm Tool bite□32 Chip conveyor
Tokyo, Japan
1996 TOSHIBA TD-40/ 65S
- used
- Manufacturer: Toshiba
- Model: TD40/65S
φ6500　T:φ4000　4jaw chuck 0.8～40rpm（18steps）　AC75Kw(Invertor) Table load：50ｔ　Rotation force: 16ｔ・m Table to under cross rail: 4000mm Square Ram stroke: 1600(Vertical) Ram right & left angle: 30°　Slant cutting angl...
Tokyo, Japan
1983 TOSHIBA TSS-20/40A
- used
- Manufacturer: Toshiba
- Model: TSS20/40A
φ4000　T：φ2000　X-1740 Z-1000　4 jaw chuck Cross-1650㎜ Work height：2200㎜　Table～Arm: 2390mm Ram tilt abgle-30° 3.2～100rpm　Table load:16t Rotation force: 4500Kgf-m Cutting force: 3000Kg Main motor: 37Kw4P
Tokyo, Japan
TOSHIBA Table type horizontal medium grill
- used
- Model: BZ8
- Spindle Diameter: 80mm dia.
Table size: T)1050×900 | Spindle diameter (φ): 80mm dia. | Specifications / included: With XY Digi | Spindle taper: MT-05 | Stroke(x,y,s): S)X1000,Y800,Z700 | Spindle stroke: SS)400 | Main shaft rpm / step: 27-1...
Tokyo, Japan
Kyoritsu Seiki Micro Boring
- used
- Manufacturer: Seiki
Taper no: NT-40 | New / used: second hand | Number: Complete set
Tokyo, Japan