Used Electrical Test Instruments in South Africa

Dummy Load (-105dBc) Connector: N-M

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-M

Chauvin Arnoux C.A 732 Non-contact voltage tester CAT III 1000 V LED

• Manufacturer: Chauvin Arnoux

Grandway FHP3P01 PON Optical Power Meter 1310,1490,1550nm

– Hand-held and battery operated – FTF LCD Display with high resolution – Filtered measurements with distinct power display – Simultaneous measurement and display power lever of 1310,1490,1550nm WL – Pass/fail fu...

TBL5016-3 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 4 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for te...

Probe for 3 kHz to 100 MHz

The TBCCP1-3K100 is a coaxial RF current monitoring probe, expanding the Tekbox product range of affordable EMC pre-compliance test equipment. The probe has a 3 dB bandwidth from 3 kHz to 100 MHz and a very flat ...

Coupling Decoupling Network M1

The TBCDN-M1 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M1 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

TBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...

TBLC08 50 Ohm // 50 µH + 5 Ohm, 8A LISN, 2 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBLC08 50uH LISN is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for t...

DEVISER AE270 Optical power meter -70dBm~+10dBm

• Pocket size, easy to carry • Cost-effective • Auto shut down and auto calibration • LCD Backlight AE Series OPM is an ideal testing instrument for fiber network installation, debugging and maintenance in optica...

Deviser EP310 Series PON Power Meter

The EP310 is a passive optical network (PON) power meter that enables users to quickly validate PON network installations. It measures 3 wavelengths (1310/1490/1550 nm) at once, with user-defined limits and USB d...

TESCA Wiring Specimen Board

Wiring specimen board have been designed specifically to study different types of cables & wires. With help of this trainer student can make easy understanding with different kind of wires & cables. It consists f...

ShinewayTech OPM-15A -70~+10dBm Optical Power Meter

Grandway FHP2B04 Optical Power Meter ::: -50 to +26dBm

Optical Power Meter -50 to 26dBm Calibrated wavelength: 850/1300/1310/1490/1550/1625nm | Detector type: InGaAs | Accuracy: ±0.2db±1nW | Resolution: 0.01dB | Linearity: ±5% | Auto power-off: Yes | Back-light: Yes ...

Chauvin Arnoux PEL103 | Power and Energy Loggers

• Manufacturer: Chauvin Arnoux

Ergonomic, magnetized and suitable for all types of cabinets, PEL103 loggers provide all the power and energy measurements simultaneously.

Chauvin Arnoux CA6416 Clamp-on Ground Resistance Tester

• Manufacturer: Chauvin Arnoux