Used test instrumente in Gauteng, South Africa

Chauvin Arnoux CA 8345 | POWER ANALYSER

• Manufacturer: Chauvin Arnoux
• Model: CA 8345

The CA 8345 is a Class A Qualistar power and energy quality analyser. Like the Qualistar+ models, it is equipped with an intuitive HMI and remains simple to use. Multilingual online help can be displayed at any t...

Deviser EP310 Series PON Power Meter

The EP310 is a passive optical network (PON) power meter that enables users to quickly validate PON network installations. It measures 3 wavelengths (1310/1490/1550 nm) at once, with user-defined limits and USB d...

Ceyear 2438CA/CB/PA/PB Microwave Power Meter

2438 series microwave power meter consists of microwave power meter host and a series of microwave power sensors. With the new design of broadband diode detector, digital signal processing technology and multidim...

Chauvin Arnoux PEL105 | Power and Energy Logger

• Manufacturer: Chauvin Arnoux

* 5 voltage inputs & 4 current inputs * All-terrain shockproof casing resistant to UV light and high temperatures * Ideal for mounting on electricity poles * Self-powered by its voltage inputs up to 1,000 V * Con...

Coupling Decoupling Network M3

The TBCDN-M3 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M3 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

Snap On 32 mm up to 750 MHz

The TBCP2-250 is a snap-on RF current monitoring probe. The probe has a very flat response with a 3dB bandwidth of 250 MHz and is characterized over the frequency range from 30kHz to 300 MHz. Upon request, it can...

FiberMASTER Series – Power Meter

The TREND FiberMASTER™ fibre optic testing kit allows the user to measure absolute power and calculate the loss of fibre optic links at several wavelengths. Absolute power measurements are helpful when trouble sh...

TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F

• Manufacturer: LiSN

The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...

TESCA Sequential Logic Tutor

The Electronic Sequencer is intended for elementary as well as advance training of digital electronics. The trainer cover regular digital circuits by solder less inter connections through use of 4 mm brass termin...

Dummy Load (-105dBc) Connector: N-M

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-M

TESCA Home Automation Electrical Wiring Trainer

It is the basic training course tutor in electrical technology. The training system consists of various electrical components used in home automation and wiring technology. Provision to interconnect individual co...

Chauvin Arnoux C.A 732 Non-contact voltage tester CAT III 1000 V LED

• Manufacturer: Chauvin Arnoux

ALL-TEST PROTM 31

• Manufacturer: ALL-TEST PRO

A PERFECT TOOL FOR TROUBLE SHOOTING,START-UP & QUALITY CONTROL OF AC/DC ELECTRIC MOTORS, GENERATORS OR TRANSFORMERS

ALL-TEST PROTM IV 2000

• Manufacturer: ALL-TEST PRO

Motor Circuit Analyzer PREDICTIVE MAINTENANCE QUALITY CONTROL TROUBLE SHOOTING

Motor Circuit AnalyzerPREDICTIVE MAINTENANCE QUALITY CONTROL TROUBLE SHOOTING

The ALL-TESTIV PRO2000 finds the faults you cant see with any other instrument. - Turn-to-turn, coil-to-coil, and phase-to-phase faults - Open phases - Burned or contaminated windings - Poor connections...