Used Material Handling Attachments in California, USA

Excavator Grapple Group 49in width, 2 x 90mm Pins, CB Linkage

Part number: 5901864 | Width: 1262 mm / 49.7 in | Jaw opening max: 3860 mm / 152 in | Jaw min: 283 mm / 11.1 in | Wear tip thickness: 40mm / 1.6 in

Excavator Grapple Group 49in width, S Pin 100mm & L Pin 90 mm, DB Linkage

Part number: 5901867 | Width: 1262 mm49.7 in | Jaw opening max: 3223 mm / 126.9 in | Jaw min: 319 mm / 12.6 in | Wear tip thickness: 40mm / 1.6 in

Excavator Grapple Group 52in width, S Pin 110mm & L Pin 100 mm, TB Linkage

Part number: 5901869 | Width: 1335 mm / 56.2 in | Jaw opening max: 3433 mm / 135.2 in | Jaw min: 271 mm / 10.7 in | Wear tip thickness: 40mm / 1.6 in

Cart for Barrels

• Manufacturer: star industries

Diameter 16", Height 7"; 2 total Cart for Barrels

2019 Altec MT66E76 Lancer

• Manufacturer: Altec
• Gearbox type: Automatic

Altec MT66E76 Lancer, Lancer s/n 0820IIG110, rear mounted on 2019 Freightliner M2 106 lancer, 6.7L diesel, Allison Auto, A/C, (4,312 miles (unverified)) 76 foot max cut height, 8 inch max cut diameter with grappl...

F9001 PCB RACK

• Manufacturer: Wittco Sales

Quick adjust PCB Rack Stackable PCB Transport and Storage Racks are made of conductive material Holds up to 50 PCBs from 2" to 9.8" (5 to 25 cm) wide Made of conductive plastic they are temperature rated to 176°F

MYD50

Dual lane conveyors and Tilt options Automatic Visual Inspection Dimensions: 1260 x 770 x 1450 mm (D x W x H) Max Speed: 1300 mm/s (X, Y) Dispensing Area: 500 x 350 mm (D x W

K1000

Low cost hand operated depanelizer Operator safety is assured by front and back blade guards Cut panels to 12.5"

N100 N400

Pneumatic operated blade Cut tabs .324" Singulate Straight tab routed panels anels

TRIDENT ZDO

Removes Any Flux From Any Alloy Closed-Loop (Zero Discharge) Wash Cycle Zero Discharge Rinse Cycle

TRIDENT CLO

Removes Water Soluble (OA) Flux Cleans Using DI Water Only (No Chemicals) Fully Closed-Loop Operation

STENCIL WASHER ECO

• Manufacturer: Wittco Sales

Removes all solder pastes Not compatible with SMT adhesive removal applications Wash solution is filtered and recirculated (closed-loop) with built-in solder paste trap and filtration system Rinse water is filter...

Pilot

• Manufacturer: Wittco Sales

Batch Load: 13” x 10” Economical, compact Designed for low maintenance, slide in/out solder bath Standard drop Jet-Fluxer for quick, accurate flux deposition

MYT50

High Performance Tabletop robots Nozzle Cleaning and Automatic Calibration Laser Height and Low Fluid Detection Dimensions: 840 x 740 x 630 mm (L x W x H) Working Area: 500 x 500 x 100 mm (X x Y x Z)

R100 R100

Low cost tool for tool for finish routing low volumes of tab routed PCBs Singulate panels of any size Router Bits 1/32" 3/64" 1/16" 3/32" 1/8"