Used Drilling Rigs in New York, USA

2008 SERVICE KING 675 DRILL RIG PACKAGE WITH CAT IV CERTIFICATION #6830T

• Manufacturer: Service King

Manufactured 2008, 104’ x 315,000# derrick, single drum with 8 lines 1-1/8” wire, dual 6’ hydro breakout, 150 ton swivel, 4-1/2” x 40’ kelly, 12’ substructure with 18” rotary table, 27’ x 10’ x 8’, 30,000# Rig...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #5067T

• Manufacturer: Bucyrus-Erie
• Model: 22W

Mounted on 2008 gooseneck trailer, 2011 66HP Tier 4i engine with approx. 1310 hours, California Carb Compliant, 40’ mast height, 2 breakout wrenches, no other tooling, currently working Price: $57,000 - Calif...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #8981T

• Manufacturer: Bucyrus-Erie
• Model: 22W

Propane deck engine, cathead, 3 line machine, 800’ of mainline, mounted on 1972 Ford truck with gas engine, 1 front and 2 rear hydraulic leveling jacks Tooling: drill stems, drill bits ranging from 6” to 8”...

LTD 360 RHINO CABLE TOOL DRILL RIG #10685T

• Manufacturer: Rhino

Built 2024, includes 4” x 14’ drill stem, 500’ x 5/8” main line, 5” x 12’ bailer (new), 6” and 10” bits (new), hydraulic controls, auto feed for mainline Price: $95,000

REEDRILL TAURUS XL DRILL RIG #10089T

• Manufacturer: Taurus
• Model: XL

Built in 1990’s, track mounted, 80’ depth, 120” max bit diameter, 10” inner kelly bar, 12” outer kelly bar, Cummins engine, automatic transmission, 25,000 lb service winch, 280 degree extendable table, 144,000...

1990 TEXOMA 600-30 DRILL RIG #3961Tb

• Manufacturer: Texoma
• Model: 600

30’ depth, manufactured 1990, Detroit engine, Funk transmission, one wet kelly bar, 3” sub size, ring and pinion rotary, 3” kelly bar, 5500 lb winch, mounted on 1995 International, good condition, ready to wor...

2006 INGERSOLL RAND RD20 RANGE 3 DRILL RIG PACKAGE #9789T

• Manufacturer: Ingersoll Rand
• Model: RD-20

Manufactured 2006, 1250/350 HR 2.5 on board air compressor, Cummins QSK19 (755 hp) deck engine, 120,000# pullback, double motor spur gear rotary head, mounted on Crane Carrier with Cat C13 (380 hp) with 9,362 ...

BAYSHORE TR110-60 TRUCK MOUNTED DRILL RIG #4776T

• Manufacturer: Bay Shore
• Model: TR60

60’ drill depth (4 element round locking), 70’ depth (4 element square friction), 198” crowd stroke, up to 13’ hole diameter, 44,000 lb crowd force, BSS 30,000 lb bar drum pull, 12,000 lb bare drum pull servic...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #7315T

• Manufacturer: Bucyrus-Erie
• Model: 22W

Mounted on 1979 Ford Louisville truck with gas engine, 6 cylinder Hercules gas deck engine, 2 rear manual jacks, fully tooled (3” and larger), sitting since 2019, does not run Price: $16,500 - Illinois BUCY...

2005 LLAMADA P90-TT CFA DRILL RIG #924T

• Manufacturer: Llamada

Manufactured 2005, 21m drill depth, 350mm-850mm diameter, 9,700 kg/m / 70,000# rotary torque with 3 speed tophead, telescopic 7 ton counterweight, 52 ton overall weight of rig (without augers), Deutz diesel 25...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #400T

• Manufacturer: Bucyrus-Erie
• Model: 22W

Built 1946, mounted on 1977 Ford F600, 16,700 actual miles, lots of repairs and upgrades, new fuel pump, new radiator, inside looks new, outside paint faded, good working condition, tools Price: $62,000 – N...

2012 SOILMEC SR30 CFA AND ROTARY DRILL RIG #4873T

• Manufacturer: Soilmec
• Model: SR-30

Manufactured 2012, approx. 7500 hours, 130 kNm max torque, 750mm CFA max diameter, 23m CFA max depth. 1500mm max rotary drilling diameter, 48m max rotary drilling depth, Cummins QSB 6.7 diesel engine, Soilmec ...

FRANKS 210 DRILLING RIG #9327T

• Manufacturer: Franks

Built 1961, mounted on 1982 International truck with 466 Industrial, PTO, Gardner Denver 6 x 9 mud pump, Mission centrifugal pump, air compressor, 23’ kelly, large rotary table, 2 winches, 3800’ depth, 300’ of...

GUS PECH GEO SWING 600 DRILL RIG #4816Tb

Cummins deck engine, rubber tracks, 420’ of 3” x 10’ rod and 400’ of 4” rods, some tooling and water swivels Price: $90,000

BUCYRUS ERIE 22W SERIES I CABLE TOOL DRILL RIG #3284T

• Manufacturer: Bucyrus-Erie
• Model: 22W

4 cyl Hercules engine, mounted on 2002 GMC truck with Cat 3126 diesel engine, 6 speed transmission, 1200' of drill line and 1200' of sandline Price: $42,000 - Tennessee BUCYRUS ERIE 22W CABLE TOOL DRILL RIG

Boyles BBS25 Drilling Rig

• Manufacturer: Boyles
• Model: BBS25

Good condition Boyles BBS25 Drilling Rigs. Located in USA and other countries. Click request price for more information.