Building Filters
Citizen R04 CNC sliding headstock automatic lathe
used
- Manufacturer: Citizen
- Model: R04
Technical specifications Number of axes: 6 | Number of spindles: 2 | Main spindle, diameter: 4 mm | Max. machining length: 40 mm | Traversing distance: 40 mm | Spindle speed: 20`000 rpm | Spindle drive performanc...
Zuchwil, Switzerland
Schaublin 125 CCN Lathe
used
- Manufacturer: Schaublin
- Model: 125CCN
Technical specifications Max. turning diameter: 270 mm | Max. turning diameter with turret: 200 mm | Max. turning diameter with collet chuck b32: 24 mm | Engine power: 5.5 / 7.5 kW | Number of revolutions: 30 - 5...
Zuchwil, Switzerland
Burkhalter water treatment plant (NEW)
used
PRODUCT / PROCESS DESCRIPTION Water quality requirement Requirements according to specification sheet SE 831288 Production volume pure water treatment 500l/h System data Softening system at p 1.0 bar: 3.6 m³/h Wa...
Zuchwil, Switzerland
Werth Scope Check 400 multi-sensor coordinate measuring machine
used
- Manufacturer: Werth
Technical specifications Construction year: 2010 | X axis: 400 mm | Y-axis: 200 mm | Z-axis: 200 mm | Max. measured piece weight: 20 kg | Max. measuring piece height: 200 mm
Zuchwil, Switzerland
MMM Uniclean® PL II 15 single-chamber washer-disinfector (year of manufacture: 2017)
used
- Manufacturer: BMT-MMM
Technical data No responsibility is taken for the correctness, completeness and up-to-dateness of the information.
Zuchwil, Switzerland
Dürr Ecoclean Minio 75 P cleaning system
used
- Manufacturer: Dürr
Technical data No responsibility is taken for the correctness, completeness and up-to-dateness of the information.
Zuchwil, Switzerland
Rösler FKS 06.1 E-SA centrifugal system
used
- Manufacturer: Rösler
Technical data Gross volume (l): 60 l A - Length: 1295 mm A1 - Length with sieving machine: 1797 mm B - Width: 1259 mm C - Height: 1064 mm D - Diameter of work bowl: 496 mm E - Discharge height of screening machi...
Zuchwil, Switzerland
STAR ECAS 32 T CNC automatic lathe
used
Technical data No responsibility is taken for the correctness, completeness and up-to-dateness of the information.
Zuchwil, Switzerland
PBR T35SNC x 3000 Cycle lathe
used
- Spindle Bore: 105 mm
Technical specifications Construction year: 1997 | Control: Fagor | Top wide: 3000 mm | Max. turning diameter: 630 mm | Top height above bed: 300 mm | Tip height above sled: 165 mm | Spindle bore: 105 mm | Number...
Zuchwil, Switzerland
NAKAMURA TW-10 CNC lathe
used
- Manufacturer: Nakamura
Technical specifications Dimension: 2955 x 1901 x 1794 mm | Floor space: 2955 x 1901 mm | Maintenance area: 4510 x 3861 mm | Weight: 4600 kg | Noise level: <80 Db | Max. bar size: 42 mm | Chuck diameter: 165 mm |...
Zuchwil, Switzerland
Nakamura WT-250 CNC lathe
used
- Manufacturer: Nakamura
Technical data No responsibility is taken for the correctness, completeness and up-to-dateness of the information.
Zuchwil, Switzerland
Biglia B1200 CNC lathe
used
- Manufacturer: Biglia
Technical data No responsibility is taken for the correctness, completeness and up-to-dateness of the information.
Zuchwil, Switzerland
OKK VC-X350 machining center
used
- Manufacturer: OKK
- Control: / Fanuc F31i-B5
Technical specifications X axis: / 600 mm | Y-axis: / 430 mm | Z-axis: / 460 mm | A-axis: / -120° to + 30° | C -axis: / 360 ° | Distance from table surface to spindle nose: / 70 - 530 mm | Table surface: / Ø 350 ...
Zuchwil, Switzerland
YASDA YBM Vi40 CNC jig boring machine
used
- Manufacturer: YBM
- Spindle Taper: / HSK-63A
Technical specifications X axis: / 900 mm | Y-axis: / 500 mm | Z-axis: / 450 mm | Distance from the table surface to the spindle tip: / 100 to 550 ° | Diameter: / 400 mm | Pallet loading capacity: / 200 kg | Tabl...
Zuchwil, Switzerland
Mikron WF 3 DP universal milling machine
used
Technical data Angled table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling spindl...
Zuchwil, Switzerland