Used Presses in Saxony, Germany

2003 hydraulic Workshop Press Zeppelin

• Manufacturer: Zeppelin
• Stroke length: 400 mm
• Power requirement: 4.8 kW

HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 1...

Single Column Press - Hydraulic EIGENBAU

• Manufacturer: Eigenbau
• Daylight: 350 mm

Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation

Screw press #B16015

Manual spindle press, balancer used dimensions approx. 1600 x 600 x 2050 mm Subject to changes and errors in technical data, specifications and prices as well as prior sale.

screw press

• Manufacturer: Unknown

Press force 100 Pressing force [kn]: 100 | Table size [mm]: 600 x 100 | Installation height [mm]: 200

screw press

Pressing force [kN]: 100 Table size [mm]: 600 x 100 Installation height [mm]: 200

Hydraulic press Neff 4 S20Z

• Manufacturer: Neff

Pressing force [kN]: 40 Table size [mm]: 320 x 220 Installation height [mm]: 200 mm

Hydraulic press, C-frame WMW Zeulenroda PYE 100SS

• Manufacturer: Zeulenroda
• Model: PYE 100

Hydraulic press, C-frame WMW Zeulenroda PYE 100SS

• Manufacturer: Zeulenroda
• Model: PYE 100

Hydraulic C-frame press MÜLLER WEINGARTEN CD40.1.94

• Manufacturer: Müller Weingarten

SN: 242040, press force 40 t, stopping time 60 ms, safety distance 100 mm, operating unit, two-hand operation

Hydraulic C-frame press MÜLLER WEINGARTEN CD63.11.21-4

• Manufacturer: Müller Weingarten

SN: 580384, pressing force 63 t, overtravel 25 mm, operating unit, work table, base area approx. 400 x 700 mm

Hydraulic press, C-frame WMW Zeulenroda (grid) PYE 63S / 1M

• Manufacturer: Zeulenroda
• Model: PYE 63

Hydraulic C-frame press MÜLLER WEINGARTEN SD16.11.47

• Manufacturer: Müller Weingarten

SN: 10100, run-on time 80 ms, two-hand operation, chair

Brass screw press 2.2 kW #B17352

• Manufacturer: IMC

Screw press dewatering press sludge press screw separator used with 2 counter-rotating parallel screws screw diameter approx. 150 mm Screw and sieves made of brass, rest steel Feed hopper approx. 400 x 500 mm Dri...

Workshop press 100 t 100t M/H-M/C-2

Condition: New machine Pressing force [kN]: 980 Table size [mm]: 1500 Stroke of the bear [mm]: 380

2001 Staufermatic Type 112

• Manufacturer: Staufermatic

Serial No.: M-1971 Control Siemens Simatic OP17