Thread cutting machine Ridgid 535
- Manufacturer: Ridgid
Used Ridgid 535 threading machine Accessories: 1 set of 1/2" - 3/4" dies 1 set of 1" - 2" dies Manual cutting head Machine untested, in its current condition, i.e., we will not overhaul the machine!
Hohenbrunn, GermanyELMAG EGM 336 Tapping arm M6-M36
- Manufacturer: ELMAG
Description incl. electronic torque monitoring -16 pcs. quick-change chuck with slip clutch DIN 371/379 mount Der schwenkbare Schneidarm mit großem Radius ermöglicht die einfache Positionierung des Gewindebohrers...
$2,074 USDWolfratshausen, GermanyMaxion UNIMAX 4 Basic
- Manufacturer: Maxion
The MAXION Unimax 4 Basic pillar drill has an infinitely variable speed range and an automatic drill feed as standard. Thanks to its heavy-duty design, this model has an enormous capacity, ensuring maximum flexib...
Feucht, GermanyMaxion UNIMAX 3 AVG
- Manufacturer: Maxion
The MAXION Unimax 3 AVG pillar drill has an infinitely variable speed range and an automatic drill feed as standard. An integrated, programmable tapping unit with drilling depth control and a digital speed and dr...
Feucht, GermanyMaxion UNIMAX 2S TAP
- Manufacturer: Maxion
The MAXION Unimax 2S TAP frequency-controlled pillar drill has an infinitely variable speed range and a manual drill feed as standard. An integrated, programmable tapping unit and a digital speed and drilling dep...
Feucht, GermanyMaxion UNIMAX 3 TAP
- Manufacturer: Maxion
The MAXION Unimax 3 TAP pillar drill has an infinitely variable speed range and a manual drill feed as standard. An integrated, programmable tapping device and a digital speed and drilling depth display round off...
Feucht, GermanyMaxion UNIMAX 1 TAP
- Manufacturer: Maxion
The MAXION Unimax 1 TAP frequency-controlled bench drill has a continuously adjustable speed range and a manual drill feed as standard. An integrated, programmable tapping unit and a digital speed and drilling de...
Feucht, GermanyMaxion BT 15 GL
- Manufacturer: BT
Tapping capacity steel st60: M2 to M10 | Discharge: 215 mm | Spindle taper: MK 2 | Spindle speed: 320, 560, 1,000 and 1,600 rpm. | Table size (l x w): 220 x 285 mm | Connection power: 400V, 50Hz | Mass: 115 kg |...
Feucht, GermanyMaxion UNIMAX 3
- Manufacturer: Maxion
The MAXION Unimax 3 pillar drill has an infinitely variable speed range and manual drill feed as standard, with the speed displayed digitally. A reversing switch for clockwise/anticlockwise rotation is also inclu...
Feucht, GermanyMaxion Ecomax 14
- Manufacturer: Maxion
The MAXION Ecomax 14 bench drill has an infinitely variable speed range and a manual drill feed as standard, with the speed displayed digitally. This bench-top model also has a work table that is height-adjustabl...
Feucht, Germany
1994 SACMA - SP 37
- Manufacturer: Sacma
- Model: SP-37
This: 4 | Max. o: 15 mm | Max.shaft length: 90/125 mm | Max pieces per min.: 200 p.p.m.
Altdorf bei Nürnberg, Germany
1994 SACMA - SP 37
- Manufacturer: Sacma
- Model: SP-37
This: 4 | Max. o: 15 mm | Max.shaft length: 90/125 mm | Max pieces per min.: 200 p.p.m.
Altdorf bei Nürnberg, Germany
1970 INGRAMATIC - GR2 Thread Rolling Machine - Planetary Die
- Manufacturer: Ingramatic
- Model: GR2
Max. o: 8 mm | Max.shaft length: 100 mm | Max pieces per min.: 1200 | Max size head: max. thread height 50 mm
Altdorf bei Nürnberg, Germany
1980 INGRAMATIC - GR2 Thread Rolling Machine - Planetary Die
- Manufacturer: Ingramatic
- Model: GR2
Max. o: 8 mm | Max.shaft length: 100 mm | Max pieces per min.: 1200 | Capstan ø: 680 | Max size head: max. thread height 50 mm
Altdorf bei Nürnberg, Germany
Bernardo TM 24 BLO / R 1200 Electr. threading machine
- Manufacturer: Bernardo
- Model: TM 24
Description With micro-spray system as standard for constant cooling and minimal cooling lubricant consumption Including blow-out device for removing chips, thus optimum view of the drill hole Including quick-cha...
$2,951 USDWolfratshausen, Germany
Tip: Enter manufacturer, model or keyword
