- Trusted Seller
2001 FASTENER ENGINEERS PF 6000-08
- Manufacturer: Fastener Engineers
Maximum rod size: 1-1/8" | Minimum rod size: 5/8" | Coil weight capacity: 6000 lbs | Maximum free wheeling speed: 100 FPM | Feed roll diameter: 8" | Motor: 2 HP
Ivyland, PA - Trusted Seller
1979 FASTENER ENGINEERS PF-2400-24
- Manufacturer: Fastener Engineers
Mandrel diameter: 24" | Mandrel length: 48" | Maximum coil weight: 2,400 lbs | Maximum speed: 300 FPM | Minimum rod size: .875" | 7/8" rod diameter: @60,000 PSI | 3/4" rod diameter: @100,00 PSI | 5/8" rod diamet...
Ivyland, PA - Trusted Seller
1976 FASTENER ENGINEERS DH-2521-70-28 R
- Manufacturer: Fastener Engineers
Capstan diameter: 28" | Speed range: 11 - 170 FPM | Electrics: 230V/60Hz/3 Phase | Equipped with: Reverse FrameMechanical Scale Cracker
Ivyland, PA - Trusted Seller
1989 FASTENER ENGINEERS P.F.B.W. 6000-08
- Manufacturer: Fastener Engineers
Maximum rod size: 1-1/8" | Minimum rod size: 5/8" | Coil weight capacity: 6000 lbs | Maximum free wheeling speed: 100 FPM | Feed roll diameter: 8" | Motor: 2 HP | Equipped with: With Butt Welder
Ivyland, PA - Trusted SellerAuction
Fastener Engineers Model WR-01-16 Wire Drawing Machine
- Manufacturer: Fastener Engineers
Fastener Engineers Model WR-01-16 Wire Drawing Machine, 20" Dia. Torque Hub. Machine No. 3, (Supplied Machine No 204)
Cicero, ILVisit Auction Website - Trusted SellerAuction
Fastener Engineers Inc. Model DT-02-20 Wire Drawing Machine
- Manufacturer: Fastener Engineers
Fastener Engineers Inc. Model DT-02-20 Wire Drawing Machine, S/N 668784, (Not in Service)
Cicero, ILVisit Auction Website - Trusted SellerAuction
Fastener Engineers Model DH-190-250-24 Wire Drawing Machine
- Manufacturer: Fastener Engineers
Fastener Engineers Model DH-190-250-24 Wire Drawing Machine, 5.9 HP, 24" Dia. Torque Hub, S/N 1269941, Machine No. 7, (Supplied Machine No. 173)
Cicero, ILVisit Auction Website - Trusted SellerAuction
Fastener Engineers Inc. Model DTHA-05-28 Wire Drawing Machine
- Manufacturer: Fastener Engineers
Fastener Engineers Inc. Model DTHA-05-28 Wire Drawing Machine, 32700 In/Lbs. Torque at 58 FPS, 44,470 In./Lbs. Torque at 30 FPM, S/N 989/6448, (Not in Service)
Cicero, ILVisit Auction Website - Trusted Seller
FASTENER ENGINEERS BW-500
- Manufacturer: Fastener Engineers
Wire range: 1/8" - 1/2" | Transformer kva: 15 KVA | Selector tap switch: 6 Point | Wire line height: 41"
Ivyland, PA - Trusted SellerAuction
Fastener Engineers Inc. Model WR-01-16 Wire Drawing Machine
- Manufacturer: Fastener Engineers
Fastener Engineers Inc. Model WR-01-16 Wire Drawing Machine, S/N 1741970, (Not in Service)
Cicero, ILVisit Auction Website - Trusted SellerAuction
Fastener Engineers Inc. Model DT-05-24 Wire Drawing Machine
- Manufacturer: Fastener Engineers
Fastener Engineers Inc. Model DT-05-24 Wire Drawing Machine, 9-70 FPM Speed Range, 42,000 In.-Lb. Torque, S/N 1731599,Machine No. 17 (Not in Service)
Cicero, ILVisit Auction Website - Trusted SellerAuction
Fastener Engineers Inc. Model DTH-0710-260-24 Wire Drawing Machine
- Manufacturer: Fastener Engineers
Fastener Engineers Inc. Model DTH-0710-260-24 Wire Drawing Machine, 3-40 FPM Speed Range, 537,000 In.-Lb. Torque at 40 FPM, S/N 3752186, Machine No. 30, (Not in Service)
Cicero, ILVisit Auction Website - Trusted Seller
FASTENER ENGINEERS DTVA-0220-S
- Manufacturer: Fastener Engineers
- Wire diameter: 6,350 millimeter
Capstan diameter: 20" | Maximum wire diameter: .250" | Speed range: up to 90 FPM | Approx. weight: 1300 lbs | Approx. floor size: 50" x 39" x 52" H
Ivyland, PA - Trusted Seller
FASTENER ENGINEERS DA-03-2020
- Manufacturer: Fastener Engineers
Capstan diameter: 20" Double Capstan | Speed range: 4 - 35 FPM | Equipped with: Reduction Capability:-60,000 PSI Tensile: .024 Sq/In Maximum-80,000 PSI Tensile: .021 Sq/In Maximum-100,000 PSI Tensile: .017 Sq/...
Ivyland, PA - Trusted Seller
24” FASTENER ENGINEERS DH-275-150-24
- Manufacturer: Fastener Engineers
24” FASTENER ENGINEERS DH-275-150-24 REF 4263 240 V
Byron, IL
Tip: Enter manufacturer, model or keyword
