Used Material Handling Attachments in California, USA

Excavator Grapple Group 52in width, S Pin 120mm & L Pin 110 mm, VB Linkage

Part number: 5901871 | Width: 1406 mm / 55.4 in | Jaw opening max: 3860 mm / 152 in | Jaw min: 283 mm / 11.1 in | Wear tip thickness: 40mm / 1.6 in

Excavator Grapple Group 49in width, 2 x 90mm Pins, CB Linkage

Part number: 5901864 | Width: 1262 mm / 49.7 in | Jaw opening max: 3860 mm / 152 in | Jaw min: 283 mm / 11.1 in | Wear tip thickness: 40mm / 1.6 in

Excavator Grapple Group 49in width, S Pin 100mm & L Pin 90 mm, DB Linkage

Part number: 5901867 | Width: 1262 mm49.7 in | Jaw opening max: 3223 mm / 126.9 in | Jaw min: 319 mm / 12.6 in | Wear tip thickness: 40mm / 1.6 in

Cart for Barrels

• Manufacturer: star industries

Diameter 16", Height 7"; 2 total Cart for Barrels

TSUBAKIMOTO MAYFRAN CHIP CONVEYER MOTOR D60W150ST-DN MF660755 6275-8268

• Manufacturer: Fanuc

“120 DAY WARRANTY. REMOVED FROM MACHINE” WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION NEXT DAY AIR SERVICE AVAILABLE ON ALL PARTS. PLEASE CALL FOR DETAILS. 120 DAY WARRANTY ON ALL PARTS CHIP CON...

2019 Altec MT66E76 Lancer

• Manufacturer: Altec
• Gearbox type: Automatic

Altec MT66E76 Lancer, Lancer s/n 0820IIG110, rear mounted on 2019 Freightliner M2 106 lancer, 6.7L diesel, Allison Auto, A/C, (4,312 miles (unverified)) 76 foot max cut height, 8 inch max cut diameter with grappl...

F9001 PCB RACK

• Manufacturer: Wittco Sales

Quick adjust PCB Rack Stackable PCB Transport and Storage Racks are made of conductive material Holds up to 50 PCBs from 2" to 9.8" (5 to 25 cm) wide Made of conductive plastic they are temperature rated to 176°F

MYD50

Dual lane conveyors and Tilt options Automatic Visual Inspection Dimensions: 1260 x 770 x 1450 mm (D x W x H) Max Speed: 1300 mm/s (X, Y) Dispensing Area: 500 x 350 mm (D x W

K1000

Low cost hand operated depanelizer Operator safety is assured by front and back blade guards Cut panels to 12.5"

N100 N400

Pneumatic operated blade Cut tabs .324" Singulate Straight tab routed panels anels

TRIDENT CLO

Removes Water Soluble (OA) Flux Cleans Using DI Water Only (No Chemicals) Fully Closed-Loop Operation

STENCIL WASHER ECO

• Manufacturer: Wittco Sales

Removes all solder pastes Not compatible with SMT adhesive removal applications Wash solution is filtered and recirculated (closed-loop) with built-in solder paste trap and filtration system Rinse water is filter...

TRIDENT ZDO

Removes Any Flux From Any Alloy Closed-Loop (Zero Discharge) Wash Cycle Zero Discharge Rinse Cycle

MYD10

Dual lane conveyors and Tilt options Automatic Visual Inspection Dimensions: 1200 x 770 x 1400 mm (D x W x H) Max Speed: 1000 mm/s (X, Y) Dispensing Area: 475 x 350 mm (D x W)

K3000

Cut panels to 18" or 24" long Singulates panels with components up to 2.5" high Guards for operator safety