Used Fanuc in United Kingdom

2003 Fanuc Fanuc RoboDrill T21iD

• Manufacturer: Fanuc
• Model: Robodrill

A one owner and well maintained 2003 built Fanuc RoboDrill T21iD with Fanuc 16iMB control, BT30 10,000RPM Spindle, 21 Tool ATC, a Zero Point sub plate, machine vice & coolant equipment. Very clean machine! Speci...

FANUC Robodrill T21iFLA 2011

• Manufacturer: Fanuc
• Model: Robodrill

We update our stock list weekly. If you would like to keep up-to-date please complete your details below.

1999 FANUC ROBODRILL ALPHA T14 iA

• Manufacturer: Fanuc
• Model: Robodrill

COOLANT TRAY TRANSFORMER MANUALS Control: FANUC 16 iM | Table size: 650.0 x 380.0 mm | Traverses x y z: 500.0 x 380.0 x 300.0 mm | Spindle speed: 50 – 12,000 RPM | Atc: 14 STATIONS | Spindle traper: BT 30 | Max l...

2003 FANUC ROBODRILL T21i DL

• Manufacturer: Fanuc
• Model: Robodrill

SWARF TRAY, COOLANT SYSTEM, SET OF TOOLING, SET OF MANUALS

FANUC Robodrill T21iFA 2010

• Manufacturer: Fanuc
• Model: Robodrill

We update our stock list weekly. If you would like to keep up-to-date please complete your details below.

1995 Fanuc M-410 Robot

• Manufacturer: Fanuc
• Model: M-410

Fanuc M-410 Robot Palletiser

Fanuc RoboDrill T14iA Vertical Machining Centre

• Manufacturer: Fanuc
• Model: Robodrill

Used Fanuc RoboDrill T14iA Vertical Machining Centre Equipped With: Coolant system Lighting Guarding

Fanuc Robot M-710i C 50S

• Manufacturer: Fanuc
• Model: M-710i
• Load capacity: 20 kg
• no. of axis: 6 axis

Fanuc Robot M-710i C 50S Immaculate Fanuc packaging robot with controller which has come from a factory which closed a few years ago. The nicest robot we have had for a long time, very well looked after.

2000 FANUC M-410 Robot Palletiser

• Manufacturer: Fanuc
• Model: M-410

FANUC M-410 Robot Palletiser Two pick up stations for A4 stacks. Twin pick up head for A4 attached to the arm.

Fanuc type System R-J2 Robot S-420i

• Manufacturer: Fanuc
• Model: S-420i
• Load capacity: 420 kg
• no. of axis: 6 axis

Fanuc type System R-J2 Robot S-420i With Guarding and full set of manuals and pendant

Nakamura Tome TW 20 CNC Twin Turret Lathe With Fanuc CNC Control & Iemca TAL AUTO 65 38 Automatic Bar Feeder

• Manufacturer: Fanuc

(1) Kitagawa HOH-60K Ø160mm 3-Jaw Power Chuck. (1) Ø140mm Collet Holder, Max 4,500 rpm. Maximum Turning Approx Ø290mm. Maximum Turning Length Approx 190mm. Bar Capacity Ø51mm. Driven Tool Speed Approx 5,000rpm. (...

Hardinge Conquest T42 CNC Slant Bed Lathe With GE Fanuc Series 18 T Control & Multifeed ML1 Short Magazine Bar Feeder

• Manufacturer: Fanuc

Twin Collet. Maximum Swing Approx Ø450. Maximum Swing Over Cross Slide Approx Ø340mm. Maximum Spindle Speed 5,000rpm. 12-Station Turret. Bar Capacity Ø38mm. Spindle Bore Approx Ø42mm. S/No. SGA-1250-B. Multifeed ...

Axe & Status Tuscan LL550 X 6000 5 Bedway Heavy Duty Lathe With Fanuc Series 0i TF Plus CNC Control

• Manufacturer: Fanuc

Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed ...

Star SR 20 Type 530G CNC Sliding Head Lathe with Fanuc Series 16 T Control & FMB 'Turbo 3 26 4200' Automatic Bar Feeder

• Manufacturer: Fanuc

7-Axis. Ø20mm Lathe Spindle Turning Capacity. Spindle Speeds Up To 8,000rpm. (3) Driven Heads. S/No. 010944. FMB 'Turbo 3-26/4200' Automatic Bar Feeder. Bar Capacity Ø3mm-26mm x 4,200mm Long.

MOTOR FANUC M-280052

• Manufacturer: Fanuc