Used Turret Lathes

Hardinge Hc Turret Lathe

• used

• Manufacturer: Hardinge
• Model: HC

1.5 Hp Name: Hardinge Hc Turret Lathe | Arrival date: 05-23-2025 | Dimensions l x w x h (inches): 76 x 38 x 64 | Capacity: 15" | Electrical: 3/60/220 | Weight (lb.): 2025 | Available quantity: 1

Warner & Swasey No.3/m-1200 Turret Lathe

• used

• Manufacturer: Warner & Swasey

Made In Usa, 2" Bore Name: Warner & Swasey No.3/m-1200 Turret Lathe | Arrival date: 07-11-2025 | Dimensions l x w x h (inches): 101 x 59 x 57 | Capacity: 12" | Weight (lb.): 3645 | Available quantity: 1

3 WARNER & SWASEY "M4630" SQUARE-HEAD RAM-TYPE TURRET LATHE w/BAR-FEED - COLLET CHUCK - TOOLING

• used

• Manufacturer: Warner & Swasey

3 WARNER & SWASEY "SQUARE-HEAD" RAM-TYPE Imperial Metric TURRET LATHE w/COLLET CHUCK & BAR FEED Serial No 2334111, Model 3, Series M4630 EQUIPPED WITH: Hydraulic Collet Chuck & Bar Feed Large Quantity Of Tooling ...

WARNER & SWASEY NO. 3 TURRET LATHE. #1227224

• used

• Manufacturer: Warner & Swasey
• Model: NO 3

HC HARDINGE "SUPER PRECISION" TURRET CHUCKING LATHE w/COLLET CHUCK - 8-POSITION POWER TURET - SOME COLLETS & TOOLING

• used

• Manufacturer: Hardinge
• Model: HC

HC HARDINGE "SUPER PRECISION" TURRET Imperial Metric CHUCKING LATHE Serial No HC3160K, Model HC EQUIPPED WITH: 8-Position Turret w/Power Electric Variable Feed Lever Head Collet Type Chuck Turret Depth Stop Coola...

11" X 18" HARDINGE HC TURRET LATHE. #0895424

• used

• Manufacturer: Hardinge
• Model: HC

Maximum swing over bed: 11" | Distance between centers: 18" | Spindle speeds - variable: 125 TO 3000 RPM | Hole thru spindle: 1-1/4" | Compound slide travel: 3" | Power feed range: 1/4" TO 7" PER MIN | Thread ra...

48" FRORIEP 4-JAW VERTICAL TURRET LATHE. #0679265

• used

• Manufacturer: Schiess Froriep

(12) .005" - .354" Table diameter: 49" (4-JAW) | Max sing: 57" | Vertical under rail: 45" | Rail travel: 48" | Head travel: 36" LEFT-RIGHT | Turret: 5 POSITION | Main head feeds: (12) .005" - .354" | Side head fe...

36" WEBSTER & BENNETT 4 JAW VTL VERTICAL TURRET LATHE. #0207323

• used

• Manufacturer: Webster & Bennett

Diameter of table: 36" | Swing: 48" | Height under cross rail: 23" | Vertical travel of turret: 22" | Table speeds (12): 13.5 TO 300 RPM | Feed rates (12): 0.005 TO 0.250 IPR | Chuck: 36" 4-JAW WITH JAWS | Turre...

Warner & Swasey 2A Square Head Saddle Type Turret Lathe w/ 3-3/4” Hole

• used

• Manufacturer: Warner & Swasey
• Model: 2A

Unit is USED and in VERY GOOD CONDITION. Unit has been powered and tested at the facility. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any quest...

Warner & Swasey 4A Square Head Saddle Type Turret Lathe w/ 9-1/2” Hole

• used

• Manufacturer: Warner & Swasey
• Model: 4A M3580

Unit is USED and in VERY GOOD CONDITION. Unit has been powered and tested at the facility. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any quest...

Warner and Swasey 2 AC Turret Lathe - #3365-5004

• used

• Manufacturer: Warner & Swasey

Warner and Swasey 2 AC Turret Lathe - #3365-5004

Warner and Swasey 2 AC Turret Lathe - #3245-5005

• used

• Manufacturer: Warner & Swasey

Warner and Swasey 2 AC Turret Lathe - #3245-5005

Hardinge HC Turret Lathe

• used

• Manufacturer: Hardinge
• Model: HC

Logistics A loading fee of $500 will be automatically added the winning invoice. Buyer responsible for all transportation costs. Removal will take place 09/15-09/19 Lot # 75 System ID # 4080560 Item # 4080561 115...