Used Threading & Tapping in Ohio, USA

FLEX ARM MODEL S-36 TAPPING ARM: STOCK #79471

• Manufacturer: Flexarm

**NO TABLE** Stock#: 79471 | Reach: 14" TO 51" | Tap capacity: #6-9/16" | Torque: 28FT/LB | Rpm: 400 | Air: 90 PSI/ 28 CFM | Tap/drill head included: YES

FLEXARM MODEL #S-36 PNEUMATIC TAPPING ARM: STOCK #80441

• Manufacturer: Flexarm

Stock#: 80441 | Arm reach: 14" TO 51" MAXIMUM | Tapping holes: #6 TO 9/16" | Air pressure: 90 PSI | Rpm: 400 | Torque: 28FT/LBS | Quick change chuck: SIZE 1 | Table: YES

FLEX ARM MODEL S-36 PNUMATIC TAPPING MACHINE: STOCK #79468

• Manufacturer: Flexarm

Stock#: 79468 | Reach: 14" TO 51" | Tap capacity: #6-9/16" | Torque: 28FT/LB | Rpm: 400 | Air: 90 PSI/ 28 CFM | Tap/drill head included: YES

8" LANDIS PIPE THREADING MACHINE: STOCK #79749

• Manufacturer: Landis

DIAMETER OF SPINDLE HOLE .. 8" Stock#: 79749 | Max capacity: 8" | Min capacity: 2-1/2" | Chuck speeds: 8.3 TO 28.5 RPM | Carriage travel: 24-3/4" | Front 3 jaw chuck: 32" | Rear 3 jaw chuck: 32" | Die head: QUICK...

5' WILTON FLEX ARM PNEUMATIC TAPPING SYSTEM: STOCK #79635

• Manufacturer: Wilton

ADJUSTABLE TABLE HEIGHT .. YES Stock#: 79635 | Arm reach: 60" | Tap capacity: 1/2" | Rpm: 400 | Torque: 28 FT/;BS | Air: 90 PSI | Quick change chucks: 13 | Quick change 3/8" jacobs chuck: 1 | Area of table: 30" X...

RIDGID MODEL #535 PORTABLE THREADING MACHINE: STOCK #73512

• Manufacturer: Ridgid
• Model: 535

Stock#: 73512 | Pipe theading capacity: 1/8" TO 2" | Bolt threading capacity: 1/4" TO 2" | Forward & reverseing: YES | Wrenchless type chuck: YES | Reaming attachment: YES | Pipe cutting attachment: YES | Phase:...

WATERBURY #20 INCLINED THREAD ROLLER: STOCK # 71569

• Manufacturer: Waterbury Farrel
• Model: 20

3" Thread Length and Shank Length 125 Pieces per Minute AC Motor and Controls

REED MODEL #22A THREAD ROLLER: STOCK #77968

• Manufacturer: Reed
• Model: A22
• Threading length: 279.4 millimeter

Stock#: 77968 | In feed capacity: 5/32" TO 3-1/4" DIAMETER | Through feed: 1/4" TO 1" DIAMETER | Thread length in feed up to: 2-1/8" | Thread length through feed up to: 11" | Die speed: 108 RPM TO 720 RPM | Cam ...

3" LANDIS LANHYROL 2-ROLL EXTENDED SPINDLE THREADING MACHINE: STOCK #65295

• Manufacturer: Landis

CAPACITY: ROLLING PRESSURE: Stock#: 65295 | Min diameter of work: 0" | Max diameter of work: 3" | Diameter of work (special): 4" | Finest pitch (un or an): 48 THREADS PER IN | Coarsest pitch (un or an): 2 THREADS...

KINE MODEL MC5-F THREAD ROLLER: STOCK #16765

HYDRAULIC UNIT & MOTOR INCLUDED TO CLOSE DIES Stock#: 16765 | Maximum through feed diameter: 1-1/2" | Maximum in-feed diameter: 2" | Maximum infeed length: 2-1/2" | Minimum part diameter: .020" | Maximum die widt...

Landis 8R Threading & Tapping

• Manufacturer: Landis
• Model: 8R

Good condition Landis 8R Threading & Tappings. Located in USA and other countries. Click request price for more information.