Used Material Handling in Bremen, Germany

2000 liter Matcon bulk container, Aisi 316

• Manufacturer: Matcon

remarks: Basic internal dimensions approx. 1,500 x 1,500 mm; wall height approx. 500 mm; cone height approx. 700 mm; Outlet with Matcon cone valve (discharging station not part of the offer); Manhole diameter app...

Stainless steel container 0.9 cbm, hanging

• Manufacturer: Sielmann

Design: cylindrical, suspended on four 100 x 50 mm brackets, with a flat upper base (1/3 open, 2/3 welded), and a conical lower base. Connections: various connections DN 25 to DN 65

Stainless steel container 2.4 cbm

• Manufacturer: Sielmann

Design: cylindrical horizontal with curved bottoms Connections: 1 manhole 340 x 440 mm in the front side and 1 x DN 100 DIN 11851 G 1 x DN 40 DI 11851 G with check valve on the upper apex line 1 x DN 50 DIN 11851...

Stainless steel container 1.3 cbm

• Manufacturer: Sielmann

Content: 1,3 cbm | Material: stainless steel | Material specification: V2A | Diameter: 1090 mm | Cyl. height: 1390 mm | Ground clearance: 1500 mm | Total height: 2890 mm | Piece: 1 | Stock: Bremen

69000 liter used aluminium silo for solids or granulate

Volume: 69.000 liter | Specific weight of the medium: 0.6 (to/m³) | Lower bottom: cone shaped bottom | Upper bottom: conical bottom | Stand type: skirt support | Ground clearance: 475 mm | Diameter inside: 3.500...

1950 liter container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: frame, Fe (galvanized); some dents on the containers; partly the clamping rings of the manholes and the outlet valve are made of Fe; Alternatively, the containers are also available from us made of alumi...

Stainless steel container 0.9 cbm, hanging

• Manufacturer: Sielmann

Design: cylindrical, suspended on 4 100 x 50 mm brackets with conical bottoms. Connections: 1 DN 350 manhole in the cylinder, 4 x DN 20 in the upper bottom, 1 x DN 25 and 2 x DN 50 outlets, DN 65 outlet at the bo...

Stainless steel container 41 cbm

• Manufacturer: Sielmann

Design: Upright cylindrical with a flat bottom and a curved top. Connections: 1 manhole (400 x 500 mm) in the cylinder and 1 2" outlet with a DN 100 sump, centered in the top, with a 200 mm diameter connection. W...

Stainless steel container 1.8 cbm, hanging

• Manufacturer: Sielmann

Design: Cylinder suspended on 4 100 x 50 mm brackets with conical bottoms Connections: 1 manhole DN 400 in the cylinder below, various connections in the upper bottom DN 25, outlet at the bottom center DN 50 If r...

Stainless steel container 10 cbm

• Manufacturer: Sielmann

Design: Cylindrical, horizontal on 6 feet, height-adjustable, with curved bases. Insulated around the cylinder and bases. Fully welded stainless steel cover. Connections: 1 manhole Ø 450 mm in the front, with an ...

Stainless steel container 117 cbm

• Manufacturer: Sielmann

Design: Upright cylinder with inwardly curved lower conical base, concrete base, with upper conical base. Propeller agitator installed at an angle in the cylinder. Insulation around the cylinder, fully welded cov...

Stainless steel container 150 cbm

• Manufacturer: Sielmann

Design: Upright cylinder with inwardly curved lower conical base, concrete base, with upper conical base. Propeller agitator installed at an angle in the cylinder. Insulation around the cylinder, fully welded cov...

Stainless steel container 0.95 cbm

• Manufacturer: Sielmann

Content: 0,95 cbm | Material: stainless steel | Material specification: VA 1.4404 | Diameter: 950 mm | Cyl. height: 1080 mm | Per floor: 200 mm | Ground clearance: 900 mm | Total height: 2380 mm | Piece: 1 | Sto...

Stainless steel container 5.9 cbm

• Manufacturer: Sielmann

Design: cylindrical standing on 3 feet made of Fe with curved bases. Connections: 1 dome DN 500 in the upper base side as well as 1 x DN 200 in the middle, 1 x DN 150 in the cylinder, 1 x DN 100 and 2 x DN 250. O...

Stainless steel container 3.85 cbm, insulated

• Manufacturer: Sielmann

Operating data: -0.07/+0.4 bar operating pressure +20/+90 °C operating temperature according to nameplate Design: cylindrical hanging on 3 claws with curved bases Insulation around cylinder and lower base, stainl...