2002 DMG DMC 340 U
- Manufacturer: DMG Mori
- Model: DMC 340 U
Control: Heidenhain iTNC 530 | X-axis [mm]: 2.800 | Y-axis [mm]: 3.400 | Z-axis [mm]: 1.600 | Rapid motion (x/y/z) [m/min.]: 60 / 30 / 40 | Spindle speeds [rpm]: 10.000 | Spindle power [kw]: 44/32 | Torque [nm]:...
Oestrich-Winkel, Germany
2008 DMG DMC 635 V
- Manufacturer: DMG Mori
- Model: DMC 635
Control: Sinumerik 840 D | X-axis [mm]: 635 | Y-axis [mm]: 510 | Z-axis [mm]: 460 | Rapid motion (x/y/z) [m/min.]: 30 | Spindle speeds [rpm]: 20 - 10.000 | Spindle motor [kw]: 9 / 13 | Tool: SK 40 | Tool capacit...
Oestrich-Winkel, Germany
2013 MTcut V110 T
Control: Heidenhain iTNC 530 | Installation: 2014 | X-axis [mm]: 1.100 | Y-axis [mm]: 610 | Z-axis [mm]: 610 | Rapid motion (x/y/z) [m/min.]: 32 | Feed (x/y/z) [m/min.]: 12 | Distance table surface - spindle nos...
Oestrich-Winkel, Germany
2017 DMG Mori CMX 70 U 3+2
- Manufacturer: DMG Mori
- Model: CMX 70 U
Control: Heidenhain TNC 620 | 5. axis: 3 + 2 Achsen nicht simultan | X-axis [mm]: 750 | Y-axis [mm]: 600 | Z-axis [mm]: 520 | Rapid motion (x/y/z) [m/min.]: 30 | Max. revolution [rpm]: 12.000 | Spindle power [kw...
Oestrich-Winkel, Germany
2006 DMG DMC 635 V
- Manufacturer: DMG Mori
- Model: DMC 635
Control: Heidenhain iTNC 530 | X-axis [mm]: 635 | Y-axis [mm]: 460 | Z-axis [mm]: 510 | Rapid motion (x/y/z) [m/min.]: 30 / 30 / 30 | Spindle speeds [rpm]: 20 - 10.000 | Spindle motor [kw]: 9 / 13 | Tool: SK 40 ...
Oestrich-Winkel, Germany
2022 DMG DMF 360 / 11 linear
- Manufacturer: DMG Mori
- Model: DMF 360
Control: Heidenhain TNC 640 Celos | X-axis [mm]: 3.600 | Y-axis [mm]: 1.100 | Z-axis [mm]: 900 | Amount of controlled axes: 5 | Rapid motion (x/y/z) [m/min.]: 80 / 60 / 60 | Spindle speeds [rpm]: 20 - 10.000 | S...
Oestrich-Winkel, Germany
2006 DMG DMC 100 H
- Manufacturer: DMG Mori
- Model: DMC 100
Control: Siemens 840D powerline + Shopmill | X-axis [mm]: 1.000 | Y-axis [mm]: 1.000 | Z-axis [mm]: 1.000 | Spindle speeds [rpm]: 8.000 | Transmission ratio: 2 | Tool: HSK 100 | Tool capacity: 270 / 360 | Amount...
Oestrich-Winkel, Germany
2007 DMG DMC 60 T RS 3
- Manufacturer: DMG Mori
- Model: DMC 60 T
Neue B-Achslager Geometrieprotokoll vorhanden Control: Siemens 840 D | New spindle: 2025 | X-axis [mm]: 780 | Y-axis [mm]: 560 | Z-axis [mm]: 560 | B-axes: +30 / -120° | Spindle speeds [rpm]: 12.000 | Tool: SK 40...
Oestrich-Winkel, Germany- Trusted Seller
Deckel G 1 U
- Manufacturer: Deckel / Maho
- Model: DECKEL G1 U
Well-maintained engraving milling machine Accessories: Letter and number set, workpiece clamp, spare belt
Wiesbaden, Germany - Trusted Seller
DECKEL GK 1
- Manufacturer: Deckel / Maho
- Model: DECKEL GK 1
Additional Used older engraving machine Accessories 6 mm collet and numbers and letters of your choice
Wiesbaden, Germany - Trusted Seller
Clamping plate
Addition Well-preserved clamping plate (machining center table) Further information Surface clean and flat, sides machined all around, center hole 40 mm Ø, various M 16 threaded holes
Wiesbaden, Germany - Trusted Seller
Wiesbaden, Germany - Trusted Seller
Clamping plate
Addition Very well-preserved clamping plate - table of a long-spindle planer - Further information Surface clean and flat, sides machined lengthwise, other side with T-slot for M 16 slot nuts
Wiesbaden, Germany - Trusted Seller
2024 MAZAK INTEGREX i 100 HS
- Manufacturer: Mazak
- Model: INTEGREX I-100
Control: Mazatrol Smooth AI 5-axis simultaneous machining | Max. turning diameter: 600 mm | Max. turning length: 850 mm | Traverse: X-axis: 535 mm Y-axis: 210 mm Z-axis: 900 mm B-axis: -30 to 210° | Main spindle...
Wiesbaden, Germany - Trusted Seller
2016 MAZAK INTEGREX i 300 ST
- Manufacturer: Mazak
- Model: INTEGREX I-300ST
Control: Mazatrol Smooth X 5-axis simultaneous machining | Max. turning diameter: 658 mm | Max. turning length: 1.519 mm | Traverse: X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to ...
Wiesbaden, Germany
Tip: Enter manufacturer, model or keyword