Used Machine Tools in Saxony, Germany

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

1999 WMW 5500x1500x250

• Manufacturer: WMW

- distance of T-slots = 542 / 500mm in a parallel offset order - T-slot according DIN 650 - a=28,0mm; h=48,0mm; b=48,0mm; c=22,0mm - incl. adjustment screws and covering caps i.D.

WMW 800x300

• Manufacturer: WMW

surface plate does have holes! Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 800 mm | Table width: 300 mm | Table height: 130 mm | Weight...

WMW 660x450

• Manufacturer: WMW

fall trough hole 115mm T-slots : according to DIN 650 and 508 a=22mm b=38mm h=40mm c=17mm

WMW dividing head

• Manufacturer: WMW

Dividing head, dividing head, dividing table, with tailstock WMW Type TU 100 ( TU100 ) dividing head: mounting: MK4 ( inside ) / cone Ø 51 / 54 mm x 10 mm ( outside ) Flange diameter: Ø 108 mm, bolt circle diamet...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 ( DH200x3 ) TGL 30-2333 centering Ø: 107 / 103 mm, depth: 17 mm ( conical ) used, tested !

WMW AP 4000x2000x310

• Manufacturer: WMW

Cast steel plates T-slots according to DIN 650 a=25; h=62; b=51; c=25mm center stand T-slots= 250mm 16 pcs. countersunk holes Ø 33 + Ø 40 mm and 6 pcs. through holes Ø 120mm i.D.

WMW AP 3000x1775

• Manufacturer: WMW

Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longi...

WMW AP 1100 x 700

• Manufacturer: WMW

Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48;c=24mm; center distance 76mm

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD DH 250 x 3 ( DH250x3 ) TGL 30-2332 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested !

WMW AP385x205x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

WMW AP 7200x2300x330

• Manufacturer: WMW

2 pieces of cast steel plates for sale free. Surface finished T-slots according to DIN 650: a=28mm; h=58mm; b=49mm; c=28, and distance T-slot to T-slot: 305mm The plates are equipped for side mounting/clamping co...

WMW AP 640x330x65

• Manufacturer: WMW

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Floor-plate length: 640 mm | Plate width: 330 mm | Plate height: mm | Plate thickness: 65 mm | Machine weight a...