Used Machine Tools in Saxony, Germany

STOLLE AP 5500x2150x340

• Manufacturer: STOLLE

Material cast steel Milled, finished surface T-slots according to DIN 650: a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm

bolster plate AP 5500x1890x380

3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distan...

bolster plate AP 2000 x 1500 (Nr.1 - Nr.6)

There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x f...

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot set, leveling foot set, vibration isolator PAULSTRA V1H752-11 Material (all-metal damping pad) CrNi steel wire All-metal damper set consists of 4 feet ! used, tested !

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

PAGUS Drill

• Manufacturer: Pagus

Twist drills RECA HSS Twist drill 29,75 - 50 mm MK shank 29.75 / 32 / 35 / 37 / 38 / 39 / 39.75 / 42 / 44 / 44 / 46 / 50 mm 14 pieces used, tested !

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

VIRAX thread cutting stock

Pipe threading stock, Threading stock VIRAX Type 62 in a plastic case, one hinge is broken used, tested!

R. HOFHEINZ magnetic coupling

Magnetic coupling R. HOFHEINZ & Co. 24 V DC New! Clutch housing: Ø 133 mm | Hollow shaft diameter: Ø 32 mm | Wavelength: 52 mm | Groove width: 10 mm | Dimensions ( magnetic coupling ): 133 x 133 x 64 mm | Dimensi...

ORTLINGHAUS magnetic coupling

Magnetic clutch ORTLINGHAUS 5 clutch discs 24 V DC New!

VEM magnetic coupling

• Manufacturer: VEM

Magnetic coupling VEM Dessau 3KL2.5 Ø 20 mm New ! 1 groove

PAGUS exterior slat

• Manufacturer: Pagus

Exterior slat, 2 pieces PAGUS 181 x 130 x 2.7 mm Other quantities on request ! New !

ORTLINGHAUS interior slat

• Manufacturer: ORTLINGHAUS WERKE GmbH

Interior slat, 2 pieces ORTLINGHAUS WERKE GmbH 3002-340-39-000000 Other quantities on request ! New !

VEM magnetic coupling

• Manufacturer: VEM

Magnetic coupling VEM Dessau 3KL5 V1 TGL 22050 ( TGL22050 ) New !