Used Machine Tools in Saxony, Germany

HOFFMANN cooling unit

• Manufacturer: Hoffmann

Cooling unit for coolant HOFFMANN ERK 210-V Connected load 11 kW 380 V used, tested !

FILTER TECHNOLOGY GERA Coolant system

• Manufacturer: FILTER TECHNOLOGY GERA

Coolant system FILTER TECHNOLOGY GERA Coolant system incomplete ( drive for the belts is missing (picture 2) ) with 4 Brinkmann pumps TBR63/270 (2 times) TB303/370-T TB250/350 New !

AMK chip conveyor

Chip conveyors, hinged plate belt chip conveyors AMK AUTOMATION Type 1100 x 430 Drive motor: 0.25 kW 230 / 400 V 3AC Coolant pump: SCHMALENBERGER SM 32-13/2 Pump motor: ATB AF 90L/2M-12L+E2 2,2 kW 2840 rpm 230 / ...

WMW AW 1020x810

• Manufacturer: WMW

Drill cube material made of cast steel. Surface with strong drill inclusions. T-slots according to DIN 650 - Vertical clamping surface: LxD: 1020 x 625mm - Horizontal clamping surface: LxW: 1020 x 810mm

WMW clamping technology set

• Manufacturer: WMW

Clamping technology set, tool holder, reducing sleeve , center point WMW 2 x fixed center point SK 45 1 x mandrel SK 50, Ø 40 mm, 80 mm long 1 x mandrel SK 50, Ø 50 mm, 235 mm long used, tested !

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 848 0.5 kW 1240 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

WMW Drill

• Manufacturer: WMW

Twist drill WMW Ø 69 mm x 425 mm HSS used, tested !

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, checked ! with operating instructions !

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, tested ! with operating instructions !

POKOLM shrink feed kit

• Manufacturer: POKOLM

Wet Wipes Packing Machine VPD450 Tool: Ø 6 / 8 / 10 / 12 /16 mm | Usable length: 75 mm | Dimensions ( single shrink fit chuck ): 163 x Ø 64 mm | Dimensions ( packed ): 330 x 210 x 70 mm

GESAU Drill

• Manufacturer: Pagus

Step drill with internal cooling GESAU ( Ø14,5x23,5/120°x25x110 ) with internal cooling ! New !

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 200 x 4 ( DH200x4 ) centering Ø: 106 / 102 mm, depth: 20 mm ( conical ) used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 - III ( DH200x3-III ) TGL 30-2333 3x threaded hole: M10 x 1.5, depth: 30 mm used, tested !

ROTO RECORD 4-jaw chuck

• Manufacturer: ROTO RECORD

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 315 x 4-II ( DH315x4-II ) used, tested !