Used Machine Tools in Baden-Württemberg, Germany

2022 KELLENBERGER KEL-VARIA UR175-1000 BEMA 90-3

• Manufacturer: Kellenberger
• Model: Kel-Varia UR175/1000
• Grinding length: 1,000 millimeter

As a global leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in new machine quality and with a warranty, but can also offer you service for your machines. Basis: Kellenberger Kel...

2004 MAG Hülle Hiller NBH135 Speed

• Manufacturer: Hüller Hille

Machining center MAG Hüller Hille Type: NBH135 Speed Year of construction: 2004 Controller: Sinumerik 840D Powerline Travel paths: X = 800 mm Y = 800 mm Z=800mm B = 360 degrees - Spindle: HSK63 tool hol...

1987 STUDER S20-2

• Manufacturer: Studer
• Model: S20
• Grinding length: 400 millimeter

Geometrically outdated and repainted With internal grinding setup Accessories on request The machine can be inspected while powered at the customer's site from 2025 through January 2026.

1999 STUDER S36 Favorit

• Manufacturer: Studer
• Model: S36
• Grinding length: 540 millimeter

In 2015, Studer overhauled the spindle head, tailstock, and workpiece table. In 2024, Studer replaced the X+Z axis drive. The system included a coolant system with a magnetic roller, a workpiece spindle, a tails...

2005 DMG DMC 70 H duoBlock

• Manufacturer: DMG Mori
• Model: DMC 70 H DUOBLOCK

DMG DMC 70 H duoBlock Year of manufacture 2005 Travel X: 700 mm Travel Y: 800 mm Z travel: 800 mm Number of axes: 4 Milling machine / machining center Control: Sinumerik 840D powerline Spindle mount: SK 4...

1980 JUNG JF520D

• Manufacturer: Jung
• Model: JF520
• Grinding length: 500 millimeter

Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - color light grey, color conditi...

2017 DMG Mori NHX 4000

• Manufacturer: DMG Mori
• Model: NHX 4000

Horizontal machining center Travel: X 560 mm x Y 560 mm x Z 660 mm Bürner filtration system High-pressure Chip conveyor 40-position tool magazine Machine is dismantled Would you like to load external content prov...

2012 Chiron DZ 12 KWM

• Manufacturer: Chiron

The used CHIRON DZ 12 KWM vertical machining center impresses with its precision and efficiency in the production of complex workpieces. With two spindles, a travel of 550 x 400 x 400 mm, and a maximum speed of 2...

2018 DMG CMX 600 V

• Manufacturer: DMG Mori
• Model: CMX 600 V

The used DMG MORI CMX 600 V vertical machining center offers precision and efficiency for 3-axis machining. With a travel range of 600 x 560 x 510 mm, a spindle speed of up to 12,000 rpm, and an SK40 tool holder,...

1998 KELLENBERGER Kel-Varia R175-1500

• Manufacturer: Kellenberger
• Model: Kel-Varia R175/1500
• Grinding length: 1,500 millimeter

Left wheel 600mm Fixed wheelhead. Non-rotatable. With new FAGOR control with BEMA cylindrical grinding surface. With new, service-friendly cabin. Completely overhauled according to Kellenberger measurement protocol.

1997 Hermle U 630 T

• Manufacturer: Hermle
• Model: U 630 T

Travel: X 630, Y 500, Z 500 mm 16 tools in the tool changer without loading magazine

2010 DMG DMC 635 V eco

• Manufacturer: DMG Mori
• Model: DMC 635 V ECOLINE

Clamping surface 790x560mm Travel ranges: X 635mm, Y 510mm Z 460mm Spindle speed up to 8000 U/min Tool holder SK 40 DIN6987 20-station tool changer Chip conveyor Coolant system 3.7 bar Electronic probe DMG TS ...

Gillardon GB16 pillar drill

Gillardon GB16 Pillar Drill -Drilling capacity 22mm -Tool holder adapted to MT3 -Quill stroke 120mm -Column extension 250mm -Spindle-to-table distance (min./max.) 30/380mm -Spindle speeds 400-2500 rpm -Power 0.37...

2009 Chiron FZ 15 K W high speed

• Manufacturer: Chiron
• Model: FZ15

5-axis Travel: X 550 x Y 400 mm x / 360 mm 3D probe Hydraulic tool clamping HSK A63 tool holder Chain magazine with 48 positions

2012 Chiron DZ 12 KWM

• Manufacturer: Chiron

Axis travel: X 550 / Y 400 / Z 360 mm Dual spindle HSK-A63 tool holder KF 150/FKA500 coolant system Chip conveyor 16-position tool magazine per spindle Bearing failure, spindle 1, X-axis guide