Used Machine Tools in Saxony, Germany

Trusted Seller
WMW clamping drive
- Manufacturer: WMW
Clamping drive, clamping force generator, electric WMW EDU I160 Motor: KMR 71 K 2 E 0.75 kW 2800 rpm 220 / 380 V 3AC Mounting ring: Diameter ( inside / outside ): Ø 137.8 / 160 mm, width: 67 mm internal thread: M...
$644 USD
Zschepplin, Germany
Trusted Seller
POREBA top slide
- Manufacturer: Poreba
Top slide with 4-fold steel holder POREBA 4-fold steel holder, 2 pieces used, tested !
$691 USD
Zschepplin, Germany
Trusted Seller
WMW clamping drive
- Manufacturer: WMW
Clamping drive, clamping force generator, electric WMW EDU I160 Torque adjustable in 8 steps max. 110 Nm 160 rpm 220 / 380 V 3AC 0.75 kW Splined shaft profile according to TGL 0-5471 for further clamping drives s...
$761 USD
Zschepplin, Germany
Trusted Seller
POREBA Luenette
- Manufacturer: Poreba
Luenette, bezel, setting stick POREBA suitable for Poreba TPK-80 ! used, tested !
$761 USD
Zschepplin, Germany
Trusted Seller
PAGUS Luenette
- Manufacturer: Pagus
Luenette, bezel, steady rest, fixed PAGUS used, tested !
$1,113 USD
Zschepplin, Germany
Trusted Seller
SILISTRA chip conveyor
- Manufacturer: Silistra
Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TC 280 x 900 ( TC280x900 ) 220 / 380 V used, tested !
$1,640 USD
Zschepplin, Germany
Trusted Seller
METAKON drilling machine
- Manufacturer: METAKON
Valve hole drilling machine METAKON VM-01 Machine was used for drilling valve holes in motorcycle rims. retract, drill, advance with laser pointer ! 380 V Documents available. used, tested ! Video:
$3,045 USD
Zschepplin, Germany
Trusted Seller
WMW dividing head
- Manufacturer: WMW
Dividing head WMW Ø 45 mm tip height 100 mm 360° rotatable used, tested !
$445 USD
Zschepplin, Germany
Trusted Seller
WMW DU 250 AS
- Manufacturer: WMW
Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck
Leipzig, Germany
Trusted Seller
IMA Norte VS 800 470x340x120
- Manufacturer: Norte
from a BAZ IMA NORTE VS 800 - clamping plates, without eyelets T-slots to DIN 650 - a = 14mm; h = 26mm; b = 24mm; c = 11mm T-slot centerstand = 125mm - side-slot left and right = width: 20mm
Leipzig, Germany
Trusted Seller
1970 WMW AP 865x780x40
- Manufacturer: WMW
surface plate with 3 base stands Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 865 mm | Table width: 780 mm | Table height: 40 mm | Height over ...
Leipzig, Germany
Trusted Seller
1987 TOS - KURIM DU 250 AS
- Manufacturer: TOS Kuřim
Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving ...
Leipzig, Germany
Trusted Seller
TOS dividing head
- Manufacturer: TOS
Dividing head, dividing head, dividing table, with tailstock TOS KURIM Type DU200AN Dividing head: Holder: Inner diameter: Ø 48 mm, depth: 50 mm -10° - +100° tiltable Tailstock with quill and fixed center point u...
$726 USD
Zschepplin, Germany
Trusted Seller
1985 WMW 3880x1390
- Manufacturer: WMW
distance of t-slots=250mm T-slot size: a=28mm b=50mm c=24mm h=52mm
Leipzig, Germany
Trusted Seller
WMW SP 4750x1850x200
- Manufacturer: WMW
steel plate are available for sale. T-slots according to DIN 650 a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm
Leipzig, Germany