Used Machine Tools in Aichi, Japan

1996 Okuma LH35-N
- Manufacturer: Okuma
- Model: LH35N
OSP7000L,. Swing over bed: 610mm,. Distance between centers:1000mm, S:X405*Z1000mm, V6 turret, H4 turret H4 tool rest, 500mm 4-jaw chuck 500mm 4-jaw chuck (Kitagawa IA8-500), with With chip controller (right hand...
Toyohashi, Japan
2007 Techno Washino G06
- Manufacturer: Washino
Control: FANUC 0i-TB. Swing: Φ285,. Standard workpiece: Φ60×60,. Spindle speed: 6,000rpm, Travel: (X)300(Z)285㎜, Tool post: comb type, Standard workpiece: Φ60×60, Spindle speed: 6,000rpm, Tool post: comb type, St...
Toyohashi, Japan
2016 Murata Machinery MW80
- Manufacturer: Murata
MURATA-FANUC32iB, Maximum cutting speed: φ80*50mm, S:(X)320*(Z)200mm 6000rpm, Gang tool post x 2 *If there are any discrepancies between the product description and the actual product, the actual product will tak...
Toyohashi, Japan
Murata Machinery MW50HG
- Manufacturer: Murata
MURATA-FANUC, Inc. Comb blade tool post*2, With gantry loader, With gantry loader, With gantry loader With gantry loader with chip controller In case of any discrepancy between the description and the actual prod...
Toyohashi, Japan
2001 Nakamura Tome WT250
- Manufacturer: Nakamura tome
- Model: WT-250
FANUC18i-T,. Swing over bed:250mm,, Max. Max. machining: ø250*555mm,. S:(X1)195*(Z1)600*(X2)195*(Z2)600*(Y)±41mm, Main spindle: 4500rpm(variable speed), Sub spindle: 4500rpm(variable speed) Sub spindle: 4500rpm(v...
Toyohashi, Japan
Ashina ATD-410
- Manufacturer: Ashina
- Model: ATD-410
Swing: 410mm,. Threading capacity: (cast iron) 5 to 16 (steel) 5 to 13 mm,, Drilling capacity: 19 mm,, Drilling capacity: 19 mm, Drilling capacity: 19 mm, Drilling capacity: 19 mm, Drilling capacity: 19 mm Drilli...
Toyohashi, Japan
Nakane Seisakusho NST-13H
- Manufacturer: Nakane Manufacturing Co.
Swing: 360 mm,. Drilling capacity: 13mm, (steel)10(cast iron)12mm, (cast iron)12mm, (steel)10(cast iron)12mm Threading capacity: (steel)10(cast iron)12mm,, Spindle taper: .2½, .2½, .2½ Spindle taper: .2½, Table: ...
Toyohashi, Japan
2004 Miyano BNE-34SY
- Manufacturer: Miyano
- Model: BNE34SY
FANUC18i-T,. Max. machining: Main/sub dia. 34*90mm, Upper turret 12 square, S:X150*Z380*Y±40mm S:X150*Z380*Y±40mm, Lower turret 10 square, S:X115*Z1212mm S:X115*Z125mm, Sub B-axis Sub B-axis, Main and sub Main an...
Toyohashi, Japan
Amada CSW-250
- Manufacturer: Amada
- Model: CSW-250
Sheet metal machine Current status: Available for immediate delivery
Nagoya, Japan
2014 Takamatsu XW130
- Manufacturer: Takamatsu
FANUC 0i-TD,. Max. processing: 280*155mm dia. Swing: 250mm dia. Main spindle through-hole diameter: φ61mm, 4000rpm 4000rpm, S:X150*Z150mm S:X150*Z160mm, 8-inch chuck, 8 square turrets Each octagonal turret, with ...
Toyohashi, Japan
1998 Takizawa Ironworks TAC510×1000
- Manufacturer: Takizawa Iron Works
FANUC 20T,. Swing over bed:510mm,. Distance between centers:1000mm, S:X285*Z955mm, 15 to 1500rpm, 3-jaw 10-inch chuck (Kitagawa JN10T), with splash cover With splash cover If there is any discrepancy between the ...
Toyohashi, Japan
2002 Techno Washino C3
- Manufacturer: Washino
- Model: C3
FANUC-21i-T, Swing above bed: φ550mm, Center distance: 800mm, S: 340mm x 650mm, 23-1800 rpm (16 speeds), 3-jaw 9-inch chuck *If there are any discrepancies between the product description and the actual product, ...
Toyohashi, Japan
Yoshida Iron Works YR5-130
- Manufacturer: Yoshida
- Model: YR5-130
Drilling capacity: 50mm(steel), M48(steel), M48(steel), M48(steel), M48(steel), M48(steel), M48(steel) Threading capacity: M48 (steel), Distance from column surface to spindle center: 290 to 1300 mm Distance from...
Toyohashi, Japan
1990 OKADA/TOMINAGA TRE-2000D
- Manufacturer: Okada
Drilling capacity: 75mm(steel), M60(steel), M60(steel), M60(steel), M60(steel), M60(steel), M60(steel) Threading capacity: M60 (steel), Distance from column to spindle center: 410 to 2020mm, Spindle end to base f...
Toyohashi, Japan
2006 Techno Washino G07-M
- Manufacturer: Washino
FANUC 21i-TB, Maximum swing: φ285, Standard workpiece size: φ100*100mm, Spindle speed: 6000 rpm, 6-inch 4-jaw chuck, Milling unit: 625-2500 (low speed) / 1250-5000 (high speed), S: (X)480*(Z)285mm *If there are a...
Toyohashi, Japan