Used Lathes in Germany

Interchangeable jaws clamping claw clamping jaws 4 pieces of – clamping width 55 mm 35348

Interchangeable jaws, top jaws, segment jaws, clamping jaws, block jaws, base jaws, four-jaw chuck, four-jaw lathe chuck, 4-jaw chuck, face plate, face plate chuck, face lathe chuck, clamping device for dividing ...

Key bar chuck from Röhm – DURO-S Ø 160 mm Camlock fastening 35280

• Manufacturer: Röhm

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks

Wedge bar chuck from Forkardt - F 250 26925

• Manufacturer: Forkardt

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks

Dividing head gears 12 pieces from – 27 to 120 teeth 35850

• Manufacturer: Testa

dividing head, dividing head, gear wheel, gear wheels lathe, spur gears, spur gear

Hydraulic power chuck by Spemo - diameter 225 mm 9657

• Manufacturer: Spemo

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks

Gear from – module 1.5 70 teeth 36079

dividing head, dividing apparatus, gear, gears, lathe

Three-jaw chuck from TOS – 125/3-2-2M2 Ø 125 mm 35755

• Manufacturer: TOS

Three-jaw chuck, three-jaw lathe chuck Manufacturer: TOS, three-jaw chuck chuck size Ø 125 mm | Passage: Ø 35 mm | Hole circle: Ø 108 mm | Accessories: incl. 2nd set of interchangeable jaws | Dimension: Ø125 x 70...

Three-jaw chuck from AROWA - Ø 250 mm 34529

• Manufacturer: AROWA

Three-jaw chuck, three-jaw lathe chuck Manufacturer: AROWA, three-jaw chuck, chuck size Ø 250 mm | Passage: Ø 76 mm | Hole circle: Ø 223 mm | Dimension: Ø250 x 125 mm | Weight.: 22 kg | Mass: 22 | Dimensions: 250...

Three-jaw chuck from – Ø 190 mm 34066

Three-jaw chuck, three-jaw lathe chuck Three jaw chuck: Chuck size Ø 190 mm | Passage: Ø 54 mm | Hole circle: Ø 174 mm / M10 | Dimension: Ø 190 x 110 mm | Mass: 11,2 | Dimensions: 190/190 / H110 mm | Internal sto...

Three-jaw chuck from Röhm - Ø 240 mm 31861

• Manufacturer: Röhm

Three-jaw chuck, three-jaw lathe chuck Manufacturer: Röhm, three-jaw chuck size Ø 240 mm | Passage: Ø 77 mm | Hole circle: Ø 220 mm | Mass: 18 | Internal storage: 3A10504

Röhm three-jaw chuck - Ø 240 mm 29045

• Manufacturer: Röhm

Three-jaw chuck, three-jaw lathe chuck Manufacturer: Röhm, three-jaw chuck size Ø 240 mm | Passage: Ø 53 mm | Hole circle: Ø 70 mm | Mass: 27 | Internal storage: 3A20202

Three-jaw chuck from – Ø 250 mm 25631

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 250 mm | Passage: Ø 91 mm | Hole circle: Ø 170 mm | Admission: Short taper 8 | Mass: 47 | Internal storage: 3B30105

Three-jaw chuck from – Ø 250 mm 21720

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 250 mm | Passage: Ø 70 mm | Mass: 27,5 | Internal storage: 3A21201

Three-jaw chuck 80 mm from Röhm - ZS Ø 80 20426

• Manufacturer: Röhm

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 80 mm | Without: Interchangeable jaws | Flange: 175 mm | Passage: Ø 19 mm | Dimensions: Ø 175 x 250 mm | Mass: 8,9 | Internal storage: 3A10505

Three-jaw chuck from – diameter 190 mm 21615

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 190 mm | Passage: Ø 56 mm | Mass: 9 | Internal storage: 3A10203