Used Lathes in Germany

Bison three-jaw chuck - diameter 250 mm 19684

• Manufacturer: Bison

Three-jaw chuck, three-jaw lathe chuck Type: ØM250C6ZJ | Feed size: Ø 250 mm | Soft: Interchangeable jaws | Bayonet: Short taper flange taper size 6, taper Ø 106 mm, bolt circle Ø 133.4 mm | Passage: Ø 80 mm | Ma...

Dividing head gears 8 pieces from – Accessories 26272

dividing head, dividing apparatus, gear, gears, lathe

Three-jaw chuck of Tempo - Diameter 190 mm 21519

• Manufacturer: Tempo

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 190 mm | Recording process: Ø 160 mm | Passage: Ø 56 mm | Mass: 10 | Internal storage: 3A21204

Three-jaw chuck from – diameter 160 mm 20587

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 160 mm | Passage: Ø 46 mm | Mass: 9 | Internal storage: 3A10401

Three-jaw chuck from – diameter 190 mm 21256

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 190 mm | Passage: Ø 57 mm | Mass: 10 | Dimensions: Ø190 / H71 mm | Internal storage: 3A10303

Three-jaw chuck from – diameter 250 mm 20581

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 250 mm | Mass: 18 | Internal storage: 3A21201

Three-jaw chuck from – diameter 190 mm 20575

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 190 mm | Passage: Ø 51 mm | Mass: 9 | Internal storage: 3A10401

Three-jaw chuck from – diameter 240 mm 19659

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 240 mm | Without: Interchangeable jaws | Passage: Ø 77 mm | Mass: 18 | Internal storage: 3A20201

Three-jaw chuck by Röhm - diameter 240 mm 19566

• Manufacturer: Röhm

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 240 mm | Passage: Ø 77 mm | Mass: 18 | Internal storage: 3A20101

Three-jaw chuck from – diameter 240 mm 19530

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 240 mm | Short taper: Short cone 6 Ø 105 | Passage: Ø 77 mm | One sentence: hard interchangeable jaws | Mass: 28 | Internal storage: 3A20501

Tailstock from – center height 150 mm 29841

Tailstock, counter bearing for dividing head, dividing attachment, lathe

Tailstock from – center height 150 mm 30181

Tailstock, counter bearing for dividing head, dividing attachment, lathe

Hand lever drill riding stick from Schaublin - 450/360/H170 mm 22688

• Manufacturer: Schaublin

Tailstock for lathe, counter bearing for dividing head, dividing attachment

Four-jaw chuck with 3-piece changeable jaws from Röhm – Ø 125 mm 36429

• Manufacturer: Röhm

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Four jaw chuck: Chuck size Ø 125 mm | Passage: Ø 32 mm | Admission: Cone 55 – 58 mm | Accessories: incl. 3-piece changeable jaws | Dimension: Ø125 x 125 mm | Mass...

Roto Record three-jaw chuck - Ø 250 mm 21705

• Manufacturer: Roto Record

three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck