Used Industrial Furnaces & Ovens in Wallonia, Belgium

2018 Ladle heating station NORDIC FURNACES

• Manufacturer: Nordic Furnaces

1 used ladle lid and one brand new one With control board Fits perfectly on HWS casting ladles 2t

Furnace loading conveyor JÖST

• Manufacturer: Jöst

Dimension: length: 4200 mm; width: 2000mm; height: 1900mm With 2 vibrating motors 1,8kW, 220/380V Up to 8 springs On rails, Geared motor for forward and backward mouvement With control board

Furnace loading conveyor UHDE

Motor UHDE type SM20/4, 1,1 kW, 220 V, 1410 rpm Loading bunker upside 1600 mm x 1500 mm, h.1400 mm Rotation on ball bearing supported ring

Waterconnections for induction furnace

Water entry DIN100 Water output 5xØ50mm With thermometer and probes of various pipes With small switch box On frame for fastening on the wall

Induction furnace INDUCTOTHERM 20t and 25t

• Manufacturer: Inductotherm

With 2 water pump stations (for furnace and control cabinet) With 2 cooling towers (closed cooling circuits) With 1 hydraulic unit with separate pumps With 1 ABB transformer With 1 control cabinet for both furnac...

Inductor for channel induction furnace JUNKER

• Manufacturer: Junker

Spare part for channel induction furnace JUNKER 350KW

1990 6 condensators for furnace, ROEDERSTEIN

Motor KVAR 250, type 553NF, 1200 V, 50 Hz, 208 A Weight: ± 50 kg/pc | Outside dimensions: 1000 mm x 580mm, h. 160 mm

Vibrator for lining furnaces and ladles

2 vibrating motors BOSCH, type 0618104008, 2860 rpm, 220/380 V With manual pneumatic valve 3 positions, pneumatic cylinder

1981 Pouring furnace JUNKER 1200 kg

• Manufacturer: Junker

Weight:: ± 12000 kg 180 KVA, 380 V Pouringfurnace capacity 1200 kg, with plug and channel Control voltage 220 V, nominal voltage 380 V Water-cooled induction channel, compressed air casting pressure, pneumatic st...

Laboratory treatment furnace RESCAL, 1200 °C

• Manufacturer: RESCAL

With thermostat up to 1200 °C With timer With ventilation and alarm, can be switched on separately

Labo dryingg furnace MECI 300°C

Eletronic command Type: EUGM, serial number: 70031 Outside dimensions: width 1000 mm, depth 900 mm, height 1390 mm Inside dimensions: widdth 700 mm, depth 630 mm, height 1040 mm 6 kW, 3 x 380 V

Induction furnace INDUCTOTHERM VIP350, 500 kg

• Manufacturer: Inductotherm

Internal dimensions (without refractory): Depth: 730mm; Ø620mm With hydraulic unit Without cooling tower With water pump With 2 crucibles for alternative working With copper rails One crucible without lining

Laboratory drying furnace VEB, type 983

As good as new Useful dimensions: Ø 500 mm, depth: 350 mm With 3 shelves Thermostat max. 250°C

Steel scrap feeding device KÜTTNER for furnace

• Manufacturer: Küttner

With 2 vibrating motors UHDE, type SM20/4 On mobile peadestal Center distance: 1330 mm, driven by drum motor BAUER; 1,5 kW; 220/380 V Wth loading shank taper 1500 mm x 2000 mm

Vibrator for furnaces and ladles f. side-lining

220/380 V, 2,6/1,5 A 3 vibration engines BOSCH With cylinder and pneumatic control by hand Opening Ø 1100 mm - 1600 mm